Upgrade your boat with SSM 3A drives and or 625hp motors
01-28-2003, 03:43 PM
#1
Registered
Thread Starter
Join Date: Oct 2000
Location: Greenwich CT. U S of A
Posts: 1,845
Likes: 0
Received 0 Likes
on
0 Posts
Upgrade your boat with SSM 3A drives and or 625hp motors
I have a full set up. They are the big shaft 3A Speedmasters, Left and right hand 1.68 ratio, gimbals, transom plates, trim pistons, tie bar, yokes etc.... Everything you need to convert your boat.
I also have the transmissions & tail stocks.
17-1/2 X 27 4 blade props also available
Check out the classifieds for complete info. and my contact information.
I also have 625hp complete, fully dressed motors with low hours also listed. Go faster for less than you expect!
I also have the transmissions & tail stocks.
17-1/2 X 27 4 blade props also available
Check out the classifieds for complete info. and my contact information.
I also have 625hp complete, fully dressed motors with low hours also listed. Go faster for less than you expect!
01-28-2003, 08:07 PM
#3
Registered
Thread Starter
Join Date: Oct 2000
Location: Greenwich CT. U S of A
Posts: 1,845
Likes: 0
Received 0 Likes
on
0 Posts
I'd like to sell the drive package whole. I'll sell the engines & transmissions seperately.
I don't think I should talk prices here, I just wanted to bring attention to my classified add. The prices are listed there.
pm or e-mail me with any questions
I don't think I should talk prices here, I just wanted to bring attention to my classified add. The prices are listed there.
pm or e-mail me with any questions
Thread
Thread Starter
Forum
Replies
Last Post
NJgr8ful
Cigarette
9
08-06-2006 05:00 PM
