quad rotors going in the cigarette
 

Gary Teague dynoed new motors today. Made 1150 hp. each. He is installing next week. Ready for sea trial. I have some great pics just can't figure out how to post them???????????
Gary is doing a great job and is a good guy to work with..

trying to post pics

try it again

easy

again

lens filter

The boat. Pics not as clear when shrunk!

Very trick looking Cigar. What is the displacement of your engines?

Man does that look sweet. ;)

572 couple more

another

Looks like your going to have a lot of aluminum polishing to do.;) ;)

I HAVE DYNOED A TON OF QUAD ROTORS AND ITS EASY TO GET 1100 TO 1450 HP AND STAY VERY DEBENDABLE !! WE HAVE SOME IN STOCK USED BUT IN GREAT SHAPE ,TWO SIZES 2.3 OR 3.3
LITER EACH ! :D :D :D :D

The boat getting #6s installed

Keep the pictures comin. That should be one SWEET ride :D:D

Jon

Quite the Puddle Jumper you got there...
 

Cigar, what kind of Cigarette is that?---38' Top Gun----42' Tiger?----46' Rough Rider? Looks like extension boxes going on with the #6's as well! Looks like you have the funds to do well with the nice hardware and all! Impressive! You're going to have A LOT of FUN!!! :)

KAAMA

38 Top Gun. You are correct we are going with extension boxes. Thank-you for your comments we are looking forward to completion.

Another pic going on the dyno!

Being dynoed!!!!!!!!!

Looks great.............

Question, I know that whipple claims you can make a lot of power on pump gas. How much octane do you need w/ engines like this ?

RJ

93 octane!

damn some guys are just born to go mental
that looks awesome
good luck with it
and hey, you have the whipples that make a TON of noise?
Some of those whipples really really SCREAM
Jason

Do I see a raw water pump down low on the even side? If so, then what is the pump being driven off the cam?

How much boost to get 1150HP and are they intercooled? Why did you use the fuel injection system over the carbs?:eek:

Cigar,
What beautiful motors! Gary is one of the best builders and riggers around. How did you get a picture of him? I don't think he's ever been seen on film before...Are your marine headers polished SS tubes or IMCO's?

ratchet
91 octane not 93

CORD
That is an external drive oil pump off the cam.
VELOCITY MARK
11lbs
BURTANDNANCY
Thank-you Burt I've seen your boat down at GT. We are going with cmi big tubes

Which one is Gary in the picture?

The tall guy on the right

11lbs of boost and on (91) octane with no intercooler!! Sounds a little fishy to me. How much compresion 7 to 1:eek:

VELOCITY MARK
These motors do have intercoolers on them they are recessed into the manifold. We are running 8 to 1. There is a couple of reasons I didn't go with carbs wanted everything to fit under the hatch(can't mess with the sundeck wife would kill me), and I think these will idle better etc.
FISHEY This isn't no fishing boat!!!!!!!!!!!!

Cool, let us know how fast when done.

motor #1 in the cig
 

first one in

motor #1 in cig
 

another pic

another

another

EFI
 

EFI is the only way to fly a carburator is such a dinosour when it comes to fuel managment i wuold put efi on anything that gas goes through if you cant tell i love efi had it on my 540s in 34 magic worked great no stalling when shifting it to gear i have a 2000 prostreet firebird with a 712 inch motor efi made 1000 hp on pump gas naturarlly aspiratedruns 200 degrees sitting in traffic try and do that with a carburator street drive to golf and sunday cruizes EFI welcome to the the new century carburators make great planters just my 2 cents wourth good luck with boat looks awsome