TRS 390 Drives
#1
Guest
Posts: n/a
TRS 390 Drives
My new boat has these drives with the bullit noses on them. I was wondering if any body can tell me about these drives and what kind of power they can take? Also where can i find props for this drive? and the final question, what kind of maintenance do the drives require. Thanks Jamie
#2
The drives are just regular TRS drives i believe....the 390 i'm not sure about. The only numbers i'm aware of were the 330, 370 and 420 combo's and most times it stood for the HP of the engine in the boat....hence if you had a 330 TRS it was a 330HP engine in there.
The TRS drives can take about 500-600HP stock if you dont beat on them too hard. They can be built to take more if need be. Contact Marc at BAM marine or Sterndrivespec on the board here....i believe they do alot of work on these drive....i had mine done by Marc and lasted 3yrs of abuse behind some 500hp engines
The TRS drives can take about 500-600HP stock if you dont beat on them too hard. They can be built to take more if need be. Contact Marc at BAM marine or Sterndrivespec on the board here....i believe they do alot of work on these drive....i had mine done by Marc and lasted 3yrs of abuse behind some 500hp engines
__________________
-Wally
Money can't buy happiness, but it can buy horsepower. And I've never seen a sad person hauling a$$!
-Wally
Money can't buy happiness, but it can buy horsepower. And I've never seen a sad person hauling a$$!
Thread
Thread Starter
Forum
Replies
Last Post
Dean Ferry
General Boating Discussion
4
11-27-2002 08:09 AM