plasma arc
#1
Registered
Thread Starter
Join Date: Aug 2002
Location: wheeler IN
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
plasma arc
Probley not but does anyone have or know of a plasma arc/ cutter for sale or trade in NW IND/ILL area? Not a small one but to cut quarter to mabey half inch material. Thanks, Nick
#3
Registered
Try Mittler supply. They use to carry welding supplys and if they don't have it they can most likely steer you in the right direction. I just pulled up there website and it looks as if they have grown quite a bit from my days back in South Bend. Mittler Supply If you don't have any luck there you might want to look at www.weldingmart.com
Good luck
Good luck
#7
Registered
Thread Starter
Join Date: Aug 2002
Location: wheeler IN
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
thanks guys, ill look at that site, quiet... yes used, but open for sugestion, 220 single, but am willing to consider three phase, I know where to just walk in and leave w one, but was hoping to find a deal, you know how it goes, thanks again, nick