Lookin for Hull!
 

Anyone got a bare hull layin' around? 24-26' I would like to use my power/TRS drive. I have all the parts. I just don't know if I want to fix my boat after last weeks disaster. Age unimportant. :(

David, I've got an '88 26 foot Hustler with no power. It's listed in the For Sale section. Do I dare ask what happened last week??

I need single setup. 10 minutes more and boat would have been on the bottom of the Delaware River near Wilmington, De. Found a crack at least 2 1/2 feet long in the bottom the hard way.

A little glass work on the transom and that big block drops right in. Let me know if you change your mind. Sorry to here about your misfortune. Did you come off a wave? How did the crack develop?

David, check out yachtworld.com. Do a search for Pantera. There is a '78 24 foot Pantera in R.I. Boat needs engine and drive. Looks pretty nice in the pictures, price seems reasonable. Might be what your looking for. Good Luck.

I have a 24 foot EXCALIBUR I/O boat in NJ, on a Galv.Dual Axle 6000lb trailer. The boat is being prepped for paint and is currently sanded to the original gelcoat. I'm looking for offers. If a project boat is what you are looking for here is one. If not, maybe after my kids get a little older I may get time to finish it myself. :(

How about something like www.yachtsalvage.com/Listings/24_Pantera_1978.htm

Les

Here's another. www.thunderboatalley.com/BNIELSEN.htm

Sharkeymarine--I sent you an email

Got it. Bare Hull and Deck w/Galvanized 6000lb dual axle trailer and brakes. All hardware and rigging is removed to prepare for paint. NO POWER,I/O BOAT. No reasonable offer refused....

sharkymarine-- the pics you sent show O/B setup

The person that had it before me put a Gill Bracket on the boat w/an Outboard. I took it off. Look closer there is a pic of the engine compartment behind the rear bench seat. Everthing is off the boat and there is nothing in the engine compartment. IT'S AN I/O BOAT NOT AN OUTBOARD. THERE IS NO SPLASHWELL.........

you are as bad as me- on here 24/7, lol. check pics of mine here- http://photos.yahoo.com/davidlee48
75 Excalibur. You are up in Brick, I take it. I know the area sort of, been there a few times anyway. I will make arrangements to look at it with you. I have a couple to look at locally also. Thanks

We sell new hulls and have one that was used and is being blueprinted as wee speak. With the hull design you will gain around 6-15 mph over conventional hull design. Check one out or drop me an email.

where can i see some pics of the bat boats?

David, I will sell you my 26 Strike Cat W/O motor and drive, it has a SSM # 2 which is the same as the TRS so you can bolt yours right up!!
Has a HD trailer and will do 90 mph with a 500hp!
Once you go Cat ,you won't go back!! :D
U can view @: eastpier.com ,just click on used boats!
Thanks
Ron...
[email protected]

I have viewed your pics and it seems as though we have the same hull. My deck is identical except for the fact I don't have hatches in the front. Also my rear seat doesn't come out in the middle like yours. I take it you needed room for a transmission? I hate to ask, What happened to this one??? It looks so nice! Yes, I am in Brick. Only 3 miles west of PROROC MARINE on Mantoloking Rd. or 2 miles from Kurt's Marine if you are familiar with those shops. If you know anyone interested in buying molds, than click this URL:SHARKEYMARINE PICS

[ 07-26-2001: Message edited by: sharkeymarine ]

Sharkey, I am really at a toss-up as to whether I should repair the hull or replace it. It has a crack in the chine at least 2 1/2 feet long, plus a piece 2 feet or so fell off the outer layer, at the crack, allowing a large amount of water in the boat. The rear seat was done to accomodate a big block, I believe. It sure does make access to the front of the engine very easy.

Is it behind the inner liner where you don't have access to the inside of the boat? If not where is the crack exactly? Toward the Stern?Bow? :confused:

The crack starts about 2 feet from the transom, then forward. I will know the extent after I pull the engine and remove the port stiffener.

Your Project
 

David, How is the boat coming along??? Do you have any pics?

25' baja force - 1986 - no power but does still have a TRS drive and tranny (Borg Warner) - located in Pittsburgh - e-mail me for details if you're interested.
[email protected]

Hows about a 27 magnum sedan,went 70 with 650 horse,has everything but mota and ex.with trailer,you wont break this bottom,yes a single drive i converted,priced to move [email protected] tripps