Exhaust Tips
03-29-2003, 09:23 AM
#1
Registered
Thread Starter
Join Date: Oct 2001
Location: Madison, WI
Posts: 1,153
Likes: 0
Received 0 Likes
on
0 Posts
Exhaust Tips
Ok...this is a stupid question but I was wondering if these tips would work on my boat? I currently have IMCO silent choice with 4" all the way out the back. How do these tips mount? Do I need to make the 4" hole in the transom bigger? I currently have non-muffled tips with a slight angle down toward the water.
Last edited by Dave1972; 03-29-2003 at 09:34 AM.
03-29-2003, 10:32 AM
#2
Registered
iTrader: (2)
If your existing tips are like mine, the tip is mounted with screws into the transom through the outside trim ring. These tips look like Corsa's that would mount by through-bolting to the inside of the transom with a trim ring. I'm not sure if you need to enlarge the hole but you may neet to drill for the bolts.
