repairing stress cracks in gel coat
03-29-2003, 05:58 PM
#2
OSO Content Provider
Commercial Member
Grind them out into a V with a dremel. Fill void with Gelcoat modified with micro balloons. Sand smooth. Then spray with matching gelcoat. You will also need to spray PVA on it to cure the gelcoat.
Don't get too crazy about it. Unless you find out the reason for it cracking and fix that problem, they will only come back.
Don't get too crazy about it. Unless you find out the reason for it cracking and fix that problem, they will only come back.
03-29-2003, 06:11 PM
#4
OSO Content Provider
Commercial Member
In that case, you may want to fill them w/epoxy and micro balloons, apply epoxy primer and then paint it.
Thread
Thread Starter
Forum
Replies
Last Post
Pure Energy
General Boating Discussion
2
02-21-2002 11:50 AM
