Hatch lifts
#1
Registered
Thread Starter
Join Date: Sep 2001
Location: Atlanta,GA
Posts: 406
Likes: 0
Received 0 Likes
on
0 Posts
Hatch lifts
I have two electric hatch lifts but had to change the hatches from gull wing to lifting front to back.I see some of the cigarette guys have the same actuator but have a system that uses aa actuator like mine but is attatched to a system that has a scissor type piece and a piece that mounts to the bottom of the hatch and incorporates a roller.Does anybody know were I can get these.
Fish
Fish
#2
Registered
iTrader: (3)
Cigarette fabricates the hatch lifts that they use.A Mercruiser trim cylinder and trim pump is used to actuate the hatch.This system works well except when the kids that are washing your 38 Top Gun stay on the button too long and Rip the Cylinders out of the Boat.Damaging the hatch etc. P.S. this did not happen to me personally.
Rob
Rob
#3
Registered
Join Date: Apr 2001
Location: Cave Creek, AZ
Posts: 923
Likes: 0
Received 0 Likes
on
0 Posts
I have the Dana Marine hydraulic hatch hinges on my boat and really like them. Each hinge has a small actuator built into it and they run off of a dedicated trim pump...No big ram in the middle of the engine compartment and the hatch opens pretty fast, too...
Thread
Thread Starter
Forum
Replies
Last Post
CBR
General Boating Discussion
12
07-15-2003 03:39 PM