Offshoreonly.com - Mechanical Trim Indicators

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - Mechanical Trim Indicators (https://www.offshoreonly.com/forums/general-boating-discussion/46826-mechanical-trim-indicators.html)

VelocityMark

04-02-2003 11:18 AM

Mechanical Trim Indicators

What kind of mechanical trim indicators does everyone use on a bravo outdrive? I have noticed that most of the ones I have seen use the one that has the cylinder that attaches to the side of the trim cylinder. But I have seen in Eddie marine and Gaffrig's catalog that they make one that bolts to the top of the drive. I don't like the one that attaches to side of the cylinder because if you have trim tabs you have 2 indicators going in one direction and one going in the opposite. Good and bad points on both would be appreciated.:confused:

Dave M

04-02-2003 01:38 PM

I have the one from Gaffig that attaches where the trim sending unit would go. It works great, no problems with it. I never had the other type.

Mike J

04-02-2003 03:16 PM

Go with the Blue Water ones.
Bill has a complete system foe
trim tabs and drives.
www.bluewater1.com
Mike J.

JUSTONCE

04-02-2003 03:22 PM

I caqn't find anything in that site?

bobby daniels

04-02-2003 03:38 PM

Mark I'd get the one's from BUDAH RACING their nice ones

VelocityMark

04-02-2003 04:05 PM

Quote:

Originally posted by JUST ONCE
I can't find anything in that site?

Your not alone. I think that is the wrong blue water web site. If anyone knows of a web site that shows a picture of the indicators please post.:confused:

All times are GMT -5. The time now is 02:47 AM.