guys help me out here , still looking for a tunnel tab!
04-02-2003, 11:36 PM
#1
Guest
Posts: n/a
guys help me out here , still looking for a tunnel tab!
i need a k-plane or similar for a tunnel tab , prefer and k plane say 14 to 18" wide by 18" to 24" or so long , maybe a 450 c 300s etc , somebody emailed me to tell me they had diffrent ones in pieces laying around they would sell but they wouldnt get back to me , i will even take pieces at this point to put something together!!! i dont need a pump but might take one as well considering price , might buy two! let me know what you have! thx , john
04-02-2003, 11:44 PM
#2
OSO Content Provider
Commercial Member
Call these people: PROROC MARINE
If they don't have what you need, they can custom make it for you...
Other Links available on my "Parts & Accessories" page on my site.
If they don't have what you need, they can custom make it for you...
Other Links available on my "Parts & Accessories" page on my site.
04-03-2003, 04:45 PM
#3
Guest
Posts: n/a
looking for used stuff , i dont see the need to pay that ridiculous amount of money for a piece of aluminum , i have some of the parts but would love to find a 14-18" wide tab to work with , i have a 380 now and its too narrow in the back , and the hinge is loose on it , thx for the help though!
04-03-2003, 05:28 PM
#4
OSO Content Provider
Commercial Member
Try them anyway, they just may have something laying around, or the piece you need may not be as much as you expect.
Good Luck...
Good Luck...
