Flame Arrestors - Low profile recommendations
#1
Guest
Posts: n/a
Flame Arrestors - Low profile recommendations
Looking for recommendations on the best low-profile air cleaner at a decent price...I've got mybe 3" total clearance, and no I am not ready to go at it with a sawzall yet...
383 cu, 380 hp, cammed for about 5,300 rpm running a stock Quadrajet
383 cu, 380 hp, cammed for about 5,300 rpm running a stock Quadrajet
#2
Guest
Posts: n/a
You should check with K&N (or your engine builder) to find out what the requirements are for air flow on that size motor. I believe that it is (96 sq. in) for a big block. Height x circumference will give you the sq in. On a 3 x 10"dia flame arrestor, 3 x(10 x (3.1416)) = 94.25 sq in. I know some people say that it doen't matter. But I thought mine ran better with the taller cleaner. Just something that you may want to look into.
Thread
Thread Starter
Forum
Replies
Last Post
THRILLSEEKER
General Boating Discussion
0
05-06-2003 07:28 AM