New 36' Spectre cat w Arneson ASD 6
09-12-2005, 03:56 PM
#91
Registered
Join Date: Oct 2003
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Re: New 36' Spectre cat w Arneson ASD 6
Originally Posted by Jassman
Rik, up to what HP/TQ can a ASD8 handle vs a #6, both with the same Bam DrySump Cyborg 1550 trannies. Thanks Jeff
I just finished rigging a 30 Daytona with the Bravo conversion arnesons. The boat was brand new as are the engines and drives.
I am running twin 557 inch bbc, solid rollers, with quad rotor whipples and twin dominators. With 8 pounds boost, 1050 Hp and approx 1000 ft lbs. The boat tears out of the hole like nothing i have seen at 70% throttle.
I havent done a top speed run yet but I anticiapate 152 to 157 should be attainable. At 4200 I am touching on 100mph gps.
Absolutely trouble free and no hint of any breakage or wear. The props are 16x35 merc five blades labbed.
My point is this kit should be able to drive most mid sized and powered Cats with no problem. I will keep you all posted as I get more time on it.
Regards
Ted
09-12-2005, 05:18 PM
#92
VIP Member
Re: New 36' Spectre cat w Arneson ASD 6
Originally Posted by Ted
Hi Jassman
I just finished rigging a 30 Daytona with the Bravo conversion arnesons. The boat was brand new as are the engines and drives.
I am running twin 557 inch bbc, solid rollers, with quad rotor whipples and twin dominators. With 8 pounds boost, 1050 Hp and approx 1000 ft lbs. The boat tears out of the hole like nothing i have seen at 70% throttle.
I havent done a top speed run yet but I anticiapate 152 to 157 should be attainable. At 4200 I am touching on 100mph gps.
Absolutely trouble free and no hint of any breakage or wear. The props are 16x35 merc five blades labbed.
My point is this kit should be able to drive most mid sized and powered Cats with no problem. I will keep you all posted as I get more time on it.
Regards
Ted
I just finished rigging a 30 Daytona with the Bravo conversion arnesons. The boat was brand new as are the engines and drives.
I am running twin 557 inch bbc, solid rollers, with quad rotor whipples and twin dominators. With 8 pounds boost, 1050 Hp and approx 1000 ft lbs. The boat tears out of the hole like nothing i have seen at 70% throttle.
I havent done a top speed run yet but I anticiapate 152 to 157 should be attainable. At 4200 I am touching on 100mph gps.
Absolutely trouble free and no hint of any breakage or wear. The props are 16x35 merc five blades labbed.
My point is this kit should be able to drive most mid sized and powered Cats with no problem. I will keep you all posted as I get more time on it.
Regards
Ted
It sounds like a stout package . Lets see some picks
Rob
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
09-12-2005, 07:34 PM
#93
arneson-industries.com
Offshoreonly Advertiser
Re: New 36' Spectre cat w Arneson ASD 6
Byron has since sold this boat and it's now in Huntington Beach.
As for the exhaust, you cannot make them run up hill!
As for the exhaust, you cannot make them run up hill!
09-12-2005, 07:55 PM
#94
Registered
Join Date: Oct 2003
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Re: New 36' Spectre cat w Arneson ASD 6
Originally Posted by Strip Poker 388
Ted Jassman got hit by the Hurricane and I dont think he has power yet. Might be awhile.
It sounds like a stout package . Lets see some picks
Rob
It sounds like a stout package . Lets see some picks
Rob
That hurricane has been devastating, sorry to hear Jassman.
I will load and show some pictures soon.
The install is very cool and clean. I am heading down to california in the next week for some running in the Delta with Rik. He wants to give it a good run and add some more equipment.
Ted
