What wires to go with????
#1
Registered
Thread Starter
Join Date: Oct 2000
Location: Kansas City, Missouri, USA
Posts: 305
Likes: 0
Received 0 Likes
on
0 Posts
What wires to go with????
Well, almost everything is finished with the new blower setup and it is coming together perfectly. I must give a big thank you to Matt and all of his crew over at Advanced Marine, they have done an amazing job and are the nicest people to deal with!! Since I replaced the ignition boxes and distributers, now I need to find some new spark plug wires. Any suggestions? I've looked at Jegs and Summit, they seem like my best bet.
Also, since I went from the 525sc's to the 420 Megas, everything has matched up except the lower and upper pulleys. The upper pulley that is on the blower fits perfect but the pulley set on the bottom is not working as great. The piece connecting to the engine fits great but the blower pulley isnt matching up to it. The pulley is a 6 bolt setup and the connection is a 3 bolt. Anyone know if there is an adapter for this? Matt tried callig B&M but was on hold for an hour!! HELP!!!!!!
Ryan
Also, since I went from the 525sc's to the 420 Megas, everything has matched up except the lower and upper pulleys. The upper pulley that is on the blower fits perfect but the pulley set on the bottom is not working as great. The piece connecting to the engine fits great but the blower pulley isnt matching up to it. The pulley is a 6 bolt setup and the connection is a 3 bolt. Anyone know if there is an adapter for this? Matt tried callig B&M but was on hold for an hour!! HELP!!!!!!
Ryan
#2
Charter Member # 55
Charter Member
As far as the plug wires, I would recommend Taylor's. alot of discussion a while back and the majority of people liked them also. They are also available in a wide variety of colors.
Can't help ya with blower pully question. Might try calling The Blower Shop.
Can't help ya with blower pully question. Might try calling The Blower Shop.