what color to do engine room?
#4
Charter Member #232
Charter Member
Sting don't they make tints for Awlgrip now? May be worth a look. Otherwise you can not do stronger then Gel with Durratech and tint it to match.
Give me a call this afternoon about the 502's if you still have them. (978) 985-0639
Jon
Give me a call this afternoon about the 502's if you still have them. (978) 985-0639
Jon
__________________
Put your best foot forward!
Put your best foot forward!
#5
Registered
Join Date: Oct 2000
Location: New York, NY - Manhattan BABY!
Posts: 1,299
Likes: 0
Received 0 Likes
on
0 Posts
I like bright white under the engines and I like to see the paint scheme of the hullsides and deck carried over onto the sides of the engine compartment and the underside of the engine hatch. I also like when the rigging reflects the color scheme (ie. all clamps, hoses, brackets, etc., etc. are powder coated, fusion coated, painted, polished or anodized and often in a multitude of complimentary colors).
#6
Platinum Member
Platinum Member
What about a med. silver or grey, or black, to me with some diamondplate would hide the grease and make the engine colors stand out, just my .02
#7
VIP Member
VIP Member
did TomCat in Yellow with Yellow smoothed blocks and gimbels pumps and drives did eveything in new race boat in orange was told not to do them in color would be hard to work on ,engines our hard in white yellow orange no difference so go to work and start painting