Hardin Oil Cooler
 

Hello Folks,

I finally have started to dress the motor hoping to drop the "Barney Bulldog Motor" in a few weeks.:cool:

Last year I ran the big Eddie Marine cooler with a Perma-cool oil temp mounted on the oil pad. I never managed to get my oil temp above 125-140, so I am considering a change.
:rolleyes:

Has anyone used the Hardin combination Oil/Power Steering Oil cooler? it is supposed to be rated up to 1000 Hp and is thermostaticaly controlled, and under 500 dollars.

Thanks for the advice everyone,

Mike "DaBeezer"

Hey Mike, I can't help you on your info but it sure is nice
hearing form you again. I hope you have a successfull
season this year.
Geo

I could use some help here also.
I was thinking of using a 16" combo cooler with the Perma-cool thermostat:confused: :confused:
Shouldn't that thermo stat get the oil at least to 190*:confused: :confused:

Good to hear from you GEO...it's been rough with a new job,
but I hope to get it in before the holiday.

I'm with you Convincor, can anybody help out?

Thanks everybody:)

This thread needs to be moved to technical Q&A.