The Dyno Results Are In!!!!!!!!!!
#15
Platinum Member
Platinum Member
Join Date: Oct 2000
Location: Cincinnati, Ohio USA
Posts: 543
Likes: 0
Received 0 Likes
on
0 Posts
Dude,
That is da chit...no doubt I'll hear ya' coming that way I can get my slow azz v-bottom outta' da way!!! I gotta get a ride in that puppy...
That is da chit...no doubt I'll hear ya' coming that way I can get my slow azz v-bottom outta' da way!!! I gotta get a ride in that puppy...
#17
Guest
Posts: n/a
it has crower hipo lifters and isky enduance springs. i hope to get 75 hrs before pulling some maint. as you know skaters want a lot of rpm to run the number and i built this to race/poker runs only. i will use my american offshore to run every day. i just dont know about 3 blades verses 4 blades?????????
#18
Charter Member #232
Charter Member
Man that thing is going to sound crazy at those RPMs Why do Skaters like to be run at high RPM's vs different gear ratio? That is interesting to hear.
Jon
Jon
__________________
Put your best foot forward!
Put your best foot forward!
#19
Guest
Posts: n/a
Audio is right change gears and get the prop shaft speed up the boat only cares if the props are buzzing I guess they most likly don't care about the motor ,but I would not turn the motors that hard ,,I really would not even for poker runs ,just gear it please !!!
Again I 'm just voicing my experence 02 cents worth don't take it wrong ,,get a cam that mkes power lower so it'll live forever
Or carry a basket for the parts
Again I 'm just voicing my experence 02 cents worth don't take it wrong ,,get a cam that mkes power lower so it'll live forever
Or carry a basket for the parts