Lookin' For Work!!!!!!!
Long time , no post !! Boat fiberglass repair here in Va. is at a all time LOW!!!Sorry ass weather for the last 2 years!Looking at all options. 25 years in glass, most of which is in repair or design & prototype building. Willing to sub-contract small parts or custom build hatches, etc. Also can do some killer custom paint with matching tattoo's. I don't get a chance to be on the "board" as often as I used to so please respond to my e-mail at [email protected]. Thanks in advance and no a#$ Hol&% need to make a sorry ass post!!
Steve |
Post are OK to keep near the top but e-mail or call!!!
Thanks' Steve |
Steve, are you still doing NACA ducts?
|
Sean,
Istill have the molds, Large & small standard sizes, plain or with ribs. Willing to modify to fit just about any application. Steve |
can you get me the dimensions? non-ribbed
and can they be installed using 5200 from the outside? |
Best to glass them in, have Steve do it...
Steve, any interest in moving to Cincinnati? Reindl Powerboats would love to have an extra experienced glass guy around, and are you good at spraying gel and lay-ups? Give Chris a call, (513) 706-3199 |
Sean,
Large vent is 10 1/2 " long, 8 1/2 " at wide end & 4 5/8 " at narrow end and approx. 1 5/8 " at opening. Small vent is 8 " long, 6 1/4 " at wide end & 2 1/2 " at narrow end and approx. 3/4 " at opening. Thanks, Steve |
Chris,
Anything is possible! Will try to call friday. Thanks, Steve |
Sean,
Vents can be bonded in, glassed in or screwed in. Chris, Didn't get a chance to call anybody today(got a '70 hemi cuda in for restoration) but will call. Steve |
do you blueprint bottoms?
|
All times are GMT -5. The time now is 08:21 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.