32 Skater Agitator 1st Day Testing
 

1st day on the lake went like this. boat ran great still testing props ran 132 mph w/17x31 3 blade cleavers 1.25 gears @6300 rpm at 3/4 throttle had to back off because of 35psi water pressure. will post results after water pressure problem is corrected. i think it has a 140 mph pass in it. runs a lot better with 1200hp blower motors then with 650hp small blocks seeya!!!!!!!!!!

There........you........go...........:D :D

COngrats on a job well done. Very classy, very meticulous and you deserve a pat on the back without a doubt.

Well done humpo, get that water pres issue worked out so I can race ya on Sunday.....:D :D ;) ;)

Merlin 540 That old girl never ran like that before. Congrats on your first test. Keep us updated :frog:

JUST AWESOME!!

Call me if you need a crew member for testing this week!! I will be available!!

Congrats, its been a long time coming. Let me know if you need some water pressure control valves. My buddy has several made up and they worked great on the Carrera. Cheap and easy to do.

Corey

Looking forward to seeing Merlin & Agitator this weekend !!!
Good for you Charlie !!!

Re: 32 Skater Agitator 1st Day Testing
 

Those numbers are giving me a nose bleed.
Ouch!!!!!

Congrats, great performance for 1st day out.

second day of testing
 

Conditions:

smooth water
3/4 fuel
3 men on board

:D

AND FOR BACK UP......

POWER....

......

.....

....

.....

......

awesome!
 

Great Job guys...lotsa luck with her....
:cool:

MANIAC!!!! :D

Wow, Nice job ! BOY, that motor looks tight in there ! :eek: (front)
I thought mine was bad .... Best of luck ,JOE

Damn... Sweet.. keep us posted!

The boat looks great! Whata ride!

Your mailbox is full & I need the phone number for Erie.
Thanks
John

Boat was running great last night! Very impressive getting pased by it when we were running 70!!:D :D

Or when ALLAN4 had to get towed in by a Skater with crash boxes:D

cool!
excellent boat ,excellent speed!
:):):):)

THANKS GUYS I AM PLEASED WITH BOATS PERFORMANCE. I WILL POST RESULTS FROM DAY 3 WE HAVE A SET OF 16.5 31 4 BLADES TO TRY NEXT. I THINK THEY WILL HAVE LESS SLIP ON TOP END. HOPE TO SEE 140MPH. I WILL KEEP YOU POSTED. THE PROBLEM WITH THE LAKE THAT WE TEST ON IS THAT ITS JUST NOT BIG ENOUGH TO STRING THEM OUT ON TOP END. WITH THE 3 BLADES IT DIDNT TAKE IT LONG TO GET THERE AND IT WASNT TOPPED OUT. SEE YA.:crazy:

Nice job!!!
And it even passes all 50 states niose laws right!!!:p

That thing is flat out wicked!!

I'll tall ya, if I had to be towed in by a boat, it may as well be one that sprays av gas fumes all over me while being towed to the dock....:D :D ;)

I think the most impressive thing was not only did I watch it go 137gps, but then he towed me about 10 minutes with NO blower surge and NO loading up and NO needing to pull out of gear....AND on crash boxes!! Idled just like a stock 454. IMPRESSIVE!!!!

Talk about nailing a setup!! Awesome job Charlie.

Swapped ign boxes and coil and the boat ran fine tonight at Brookville. Not quite 137, but I'm working on it....:D :D :D

How's that saying go...."It's not the fastest boat that wins, but it's the boat who crosses the finish line first...."

no allen to finish first you must first finish:crazy:

Oh, okay....I knew it was something like that......HeHeHe.....

IMPRESSIVE!!!!
 

I was only kiddin about the windshield:D I'm ready to get my freakin head ripped off. On a serious note... Way to go Charlie. Be carefulllllll. CeeeeeeeeeeeeeYa E

I saw the boat run today in New Richmond...The Agitator was the feature event! Great job Charlie.