Project update!!! Before and after dash pics on Scarab
07-01-2003, 10:49 AM
#24
Charter Member #737
Charter Member
Justin
Looks great.
Looks great.
07-01-2003, 12:02 PM
#26
Registered
Thread Starter
Join Date: Sep 2002
Location: 7.5mm LOTO
Posts: 887
Likes: 0
Received 0 Likes
on
0 Posts
Thanks everyone......now the fun begins!!! For the rest of the summer weekends I will be at LOTO. I've already missed half my summer because of this and it has been the WORST winter of my life ( 2 deaths, no more g-friend of 5 years, school, roommates, etc).
Things may be turning around, at least with the ladies
But either way I am just glad I will be back out on this beast!!!!!!!
Velocity Mark>>> the panels were done by Team Marine out of Ettrick, Wisconsin, I forget the name, but many other OSO members have used them and were just as, if not more happy than myself. Kevin does the design and cutting I believe and Bill is usually the one that you would talk to. Good friendly people there that will give you what you are asking for in the time you need it. So order a week ahead
Here's the # if you are interested: 608-525-8326
Cost about $500 for the three panels AND all the rocker switches.
Gaffrig Gauges were a different story
Again thanks for the compliments everyone and I'll have some better shots this holiday weekend.
Everyone, please be safe, watch out for 'that' drunk guy, and have a helluva weekend!!!!!!!!!!!!!
Things may be turning around, at least with the ladies
But either way I am just glad I will be back out on this beast!!!!!!!
Velocity Mark>>> the panels were done by Team Marine out of Ettrick, Wisconsin, I forget the name, but many other OSO members have used them and were just as, if not more happy than myself. Kevin does the design and cutting I believe and Bill is usually the one that you would talk to. Good friendly people there that will give you what you are asking for in the time you need it. So order a week ahead
Here's the # if you are interested: 608-525-8326
Cost about $500 for the three panels AND all the rocker switches.
Gaffrig Gauges were a different story
Again thanks for the compliments everyone and I'll have some better shots this holiday weekend.
Everyone, please be safe, watch out for 'that' drunk guy, and have a helluva weekend!!!!!!!!!!!!!
07-01-2003, 05:31 PM
#29
Registered
iTrader: (2)
Hey OB21...Who's doing your engine work?
I was at Berger's Marine (1.5MM) last Saturday and saw an engine in the shop with purple painted block and valve covers. Kinda reminded me of your paint scheme, plus Mike said it was out of an older Scarab. They were adjusting the rockers at the time.
I was at Berger's Marine (1.5MM) last Saturday and saw an engine in the shop with purple painted block and valve covers. Kinda reminded me of your paint scheme, plus Mike said it was out of an older Scarab. They were adjusting the rockers at the time.
07-01-2003, 05:50 PM
#30
Registered
Thread Starter
Join Date: Sep 2002
Location: 7.5mm LOTO
Posts: 887
Likes: 0
Received 0 Likes
on
0 Posts
Yep....that's mine!
Spoke to him an hour ago and motors AND drive set up. Went to start, but batteries dead All needs to do is break in the cam.
I'm really anxious to find out in time for the "Mind if I Smoke" run. Just depends on if there is something else, but now both motors have been run and everything sounded good!!!
Spoke to him an hour ago and motors AND drive set up. Went to start, but batteries dead
All needs to do is break in the cam.I'm really anxious to find out in time for the "Mind if I Smoke" run. Just depends on if there is something else, but now both motors have been run and everything sounded good!!!
