![]() |
Originally posted by Dr.Santiago Byron here is a photo of OSO member Imongo from St.Thomas US Virgin Island with some girls sitting on the Pulse Drive. Now try that with an Anerson Drive or a #6 drive:eek: Those drives are chick magnets! :D |
Originally posted by Byron I guess thats not going to happen with Anesons. Approx how much will the pulse set-up cost ? |
Good reason and PIC Doc, boat looks great!
|
Originally posted by Byron I guess thats not going to happen with Anesons. Approx how much will the pulse set-up cost ? The only downside is dial-in(prop) time could be longer because not every boat has been fitted with surface piercing pulse yet. Call Tony or Tim at Pulse they are great to work with. Hugh |
If I break one more XR I'll be looking at the Pulse Drive as a replacement too. I have a 386 Sonic with a built in swim platform. I have heard that they have a hard time fitting the Pulse Drive to that type of transom.
|
Quiet Storm.
What engines do you have? How many hours do the XR's last. |
What do you mean IF you break another drive, don't you mean when?
|
salesmanship
The drives have about 100 hours on them. The port side broke last month and the starboard side just broke Saturday. The motors are 575 SCi's. Byron I'm hoping I just had a bad set of gears. The only reason I'm not foaming at the mouth is the extended warranties are covering the repair cost. |
Thanks Byron
It seems that 575's and XR's on boats 38 and over are bad news. Just curious. I'm hearing stories about all types of brands. TS |
doc, why did you put rockers into the bottom, if it had a slight hook i can understand working the bottom out to be straight, why rock it????
|
| All times are GMT -5. The time now is 07:06 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.