Looking for a Pair of used Mercury #6 Drives
 

Anyone looking to get rid of a pair?? And possibly some props for them?

Chris Reindl
[email protected]
(513) 706-3199

Try Rod at Honker Cut Marine in Stockton CA, he has been into racing for some time and may have some or know someone that does.

209 476 0103

www.honkercutmarine.com

Good Luck

I think BACARDI SILVER left one in Sarasota between turns 1 and 2! On second thought maybe I'll go back and get it.

Greg

Hey Chris,
I dont have any drives but I do have a pair of 16.5 x 32 4blade props that are almost brand new as well as a pair of 16.5 x 34 4blade props that need a little cleanup. If you are looking for something in this range let me know.

Steve Schmidt
Competitive Edge Marine
954-564-0015

Good luck Christopher

you put'n BIG power in a couple of bat boats Chris ? :D :D

Please tell me that you're going to hang one on the back of a 24. That would be insainly cool!

get a hold of MIKE J in Cali. I think he has some. PAt Weisman (sp) should have his Number

Rick

Call Craig Colabella at Colabella Performance in St Could FL. If he doesn't have them he can probably tell you who does.

Call the boys at White Knuckle Racing. If they are not going to race the #36 SCL they might not need the #6s on it.

I saw a set in the back of Powerboat Mag w/ props. I dont have the mag at work though.

What do you need? new or old style, wet or dry, swept or standard, racing or pleasure, ratio, color? We have props too. 1 2 3 4 5 6 blade. We have lots of friends getting rid of their old stuff for new.
pat W

Thanks for all the leads, these are for a pleasure rerig, drysump, new style.

I will call you guys on the Props.

I think Pat W. (Shifter) would
be your best bet, Weismann.
ou might talk to him about
one of his surface drives on
a Bat Boat.
I wlll Email you about a set I
know of also.
When are you going to be out
here on the West Coast.
I think I know of someone who
might like to run one of your
Boats, NOT ME, The old RainX
boat was to much for my old
back.
See Ya out here.
Mike J.

Mike,

You would not beleive the things we and Premier Performance Interiors have done to make the boat easy on the body. I assure you no more sore Mondays.

As for the surface drives on the 28, I think they would work great and have reccomended them to a few pleasure custmers.

We have someone rigging a 24 with surface drives, may be ready by next year.

Thank for all the help, still looking for a pair with a pleasure boat Gear Ratio, the best would be the 1:35.

Anyone else?