Merc Water pressure relief valve #
1 Attachment(s)
Sorry it took so long. I have them in and they work fine.
|
sketch
1 Attachment(s)
Merc sketch
|
What kind of application (boat/motor) have you installed this part in? How difficult is the install (drilling/tapping)? By how much have you lowered your water pressure?
I have been battling a WP issue in my 32 Fever 502's for some time. Thanks for the post. Link to Merc Parts Express -http://www.mercurypartsexpress.com/PartsExpress/ProductSelection/ServiceParts/sphome.asp?CID=164151186074230062270 |
Relief Valves
1 Attachment(s)
the valves are in 540/500 bulldogs. My pressure gauges were pegged at 35 psi so I really don't know high high the pressure was. Now I max out at 25 psi. I put thru hulls on the side to dump the water.
|
one more
1 Attachment(s)
one more
|
last one
1 Attachment(s)
last one
|
top
|
offshor,
Thanks for the info. They should have those on the engines stock from merc. Dan |
How much?
|
Valves
Approx $100. each. Merc continued to deny that there was a high pressure problem. They just came out with these about a year ago.....wonder why ?
|
All times are GMT -5. The time now is 07:19 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.