He got me for 10,000. Suppose to build a stock 502. Engine never had oil pressure so I finally saved enough to have it pulled out again by some reputable this this time. The boat shop owner and his engine builder pulled the pan and Bruce put stock size rods on a machined crank. Not only that but rear main seal was not put on correctly. It had used pistons, used oil pump, used timing chain. They could not believe that it stayed together. Knock sensor was disconnected valve covers were RTV’ed. I tried to call Bruce to see if he would make it right but he said nothing to help. He is a liar a crook and just terrible person. I hope one day someone screws him over like he has done to people his whole life.!