Where to find 5" diameter exhuat tips?
 

I've been trying to find 5" inch exhaust tips and I can't seem to find anything. Anybody know?

I'll check that out thanks. Anyone else?

Is that a muffler set up or just plain tips? I'm looking for tips.

Re: Where to find 5" exhuat tips?
 

Have you tried Rexx Marine
http://www.rexmar.com/page230.html

Here take a look, otherwise call Stainless Marine they can make them if they do not have them!

Res and IMCO

Stainless Marine in Miami can make you whatever you need. 305-681-7893.

I looked at rex and imco, at least on the website. I'm looking for 5" i.d. tips. Is stainless marine pretty expensive?

HERE IS THE ANSWER YOU`VE BEEN WAITING FOR:

I bought my 5" tips from CP Performance. They are polished stainless. They had to make them, these are not an "on the shelf" item. They are 13" overall with 5" on one side of flange and 8" on other. They are cut with a 30* slant and have internal "burn-proof" flaps. I received them 2 weeks after I ordered them. Cost was $145 each.
I`m sure they can be made to your specs. I`ve had them 2 summers and they still look new after a little spit shine.
By the way, this was the least expensive place I found at the time. I buy plenty from them, they usually offer the lowest price on marine performance parts.
Hope this helps!
Donnie

5" diameter

Ooops
 

Stainless Marine, they will get you what you need.

Guess what I have sitting in my garage???????
I believe they are 5" tips off F2 Wild Child.
We replaced them when we went to full length solid pipes .
I will check them later
Dave

Hi MadHatter. DJD will cut you a fair deal on them. He's a straight shooter.

Aw shucks, thanks man. Hey crazy horse, you followed me all the way to port sheldon a couple weeks ago, I was hoping for a race! Actually I thought you were my Dad until you turned off.

I've bought the five inch tips from stainless marine, they hold them in stock, angled or straight flange, angled or straight tips! a lot dearer than a four inch tip tho'

What gave me away? My boat doesn't stand out,,,,,,,

Psshh, no not all. I could tell from a ways back that it was a cig so I thought it was my Dad catching me, then I didn't see any red on the bow. I was just like what do we have here!?

Any word on the tips DJD?

I have a friend with 2 pair of 5" straight cut tips with Teague flappers that are brand new. Let me know if your other deal does not pan out.

These are 4.5" tips, not 5" as stated above.

rbtnt, yes I need them. internal or external flappers?

My mistake, they are 4.5" tips.

Sorry for the confusion.

Anybody know if stainless marine has a website?

Here it is.

http://www.stainlessmarine.com/

Sorry I didn`t make myself clear....

YES....MY TIPS ARE 5" IN DIAMETER........
AS IN ACROSS THE OPENING, 5 INCHES FROM INSIDE ACROSS TO THE INSIDE OF OTHER. YOU KNOW, 5" INSIDE DIAMETER................
OK?

I bought mine from CP Performance.
www.cpperformance.com
Always had good customer service from them.

I think you've had too much sun DonMan.