SPY PHOTO: New Spectre 24
#2
Registered
Thread Starter
no cut corners
Grafik EFX paint
Polished radar/bimini
built in blender
tons of seating
enclosed head
single or twin's
swim deck
all the high end race boat gages,throttles and fittings
Built to the same exacting specs as Spectre Race/poker run boats
I love it!
I get to justify my 100 mph hot rod and I don't have to compromise on a family/friend sport-around boat.
I'll post performance specs when I get them.
Maximus
Polished radar/bimini
built in blender
tons of seating
enclosed head
single or twin's
swim deck
all the high end race boat gages,throttles and fittings
Built to the same exacting specs as Spectre Race/poker run boats
I love it!
I get to justify my 100 mph hot rod and I don't have to compromise on a family/friend sport-around boat.
I'll post performance specs when I get them.
Maximus
#3
Registered
Thread Starter
we
We talked about it at length. several builders have attempted to offer a high speed catfish but were not successful. This boat was built because so many of his friends,clients and colleagues wanted an easy fast sport boat with no hassle's. Oh yeah that looked great as well.
Plus Spectre has the 31 and 42 molds being built.....lot of work!
The boat ran 68mph with a single 250xs today. it's first splash. Now with some fine tuning lab prop engine height adj. she will run 71-74mph.
I will post addl pic's in the water tomorrow.
Maximus
Plus Spectre has the 31 and 42 molds being built.....lot of work!
The boat ran 68mph with a single 250xs today. it's first splash. Now with some fine tuning lab prop engine height adj. she will run 71-74mph.
I will post addl pic's in the water tomorrow.
Maximus
#5
Registered
Thread Starter
Russ
Hey Russ
Bottom is conventional- no steps
I have some addl pics to post however I'm heading to the keys for a poker run tomorrow. I'll post them as soon as I get back.
The boat is in the paint shop right now and I will be able to post finished paint by Wed.
maximus
Any other questions feel free to call me 727-542-6927
Bottom is conventional- no steps
I have some addl pics to post however I'm heading to the keys for a poker run tomorrow. I'll post them as soon as I get back.
The boat is in the paint shop right now and I will be able to post finished paint by Wed.
maximus
Any other questions feel free to call me 727-542-6927
#6
~~~~
Charter Member
Max,
Post some dimensions like beam, measured length, weight, if possible.
Sounds like a winner. More people are going this way (Center Consoles). Less hassle, more practical. The performance numbers are good.
I do remember seeing a used 22 foot CC in the Boat Trader a couple years back. I wasn't sure if it was the same company (Spectre) but it turns out it was.
Thanks again.
Russ
Post some dimensions like beam, measured length, weight, if possible.
Sounds like a winner. More people are going this way (Center Consoles). Less hassle, more practical. The performance numbers are good.
I do remember seeing a used 22 foot CC in the Boat Trader a couple years back. I wasn't sure if it was the same company (Spectre) but it turns out it was.
Thanks again.
Russ
Thread
Thread Starter
Forum
Replies
Last Post
martiniboat
General Boating Discussion
25
11-03-2004 05:33 PM