check these naturally asperated beauties
#1
Platinum Member
Platinum Member
Thread Starter
check these naturally asperated beauties
Finally got a chance to get some pics of motors, they are being picked up tomorrow, and on their way to Nor-Tech. Here are the specs:
599 C.I. DartBlocks
745 h.p@ 5500 rpm's idle @ 750 rpm's
763 tq @ 4500 rpm's wot @ 5500 rpm's
Lunati pro race crank
Oliver billit rods
JE forged pistons
Dart Pro 1 full ported and hand polished heads
Crane hyd. roller cam & hardware
Custom 14 quart oil pan
2000 cfm billit throttle body
MSD ignigtion
Custom built thermostatic oil system
Billet power steering pump w/underdrive pulleys for acc.
They look really cool, house of colors green block with purple accessories. The valve covers will also be chrome , not the silver painted ones shown, and the flame arrestor will also have their logo TMP Racing ingraved on them, when they show up in 3 weeks.
599 C.I. DartBlocks
745 h.p@ 5500 rpm's idle @ 750 rpm's
763 tq @ 4500 rpm's wot @ 5500 rpm's
Lunati pro race crank
Oliver billit rods
JE forged pistons
Dart Pro 1 full ported and hand polished heads
Crane hyd. roller cam & hardware
Custom 14 quart oil pan
2000 cfm billit throttle body
MSD ignigtion
Custom built thermostatic oil system
Billet power steering pump w/underdrive pulleys for acc.
They look really cool, house of colors green block with purple accessories. The valve covers will also be chrome , not the silver painted ones shown, and the flame arrestor will also have their logo TMP Racing ingraved on them, when they show up in 3 weeks.
#2
Platinum Member
Platinum Member
Thread Starter
pic #2
#3
Platinum Member
Platinum Member
Thread Starter
Pic #3 Custom built thermostatic oil system
#4
Platinum Member
Platinum Member
Thread Starter
The front end of the shop, where all the good stuff is
#6
Platinum Member
Platinum Member
Thread Starter
A few other motors being built.
#7
Platinum Member
Platinum Member
Thread Starter
A older Sonic getting a few neat things done to it
and...............................
and...............................
#8
Platinum Member
Platinum Member
Thread Starter
a pair of 550 hp mills, fits very easily in this Sonic
#9
Platinum Member
Platinum Member
Thread Starter
Lastly the paint on the NorTech is being worked on, Im trying to get something close to the graphics on my Dually so that they match when going down the freeway. The flames will be backwards on the boat, puple and green, but the base of the boat will be Tangerine with some silver highlights. What do you honestly think. Thanks Jeff
#10
Platinum Member
Platinum Member
Thread Starter
a little closer from the other end. Also just got the DPPI turbo back dual exhaust, sounds sweet,