Commercial construction, mostly restaurants www.wheatonconstruction.net
|
I run one of the largest Sea Ray boat dealerships in the country. I am located in Brick, NJ (MarineMax 732-840-2100).
|
Originally Posted by d-hlaw
(Post 781503)
I'm good at giving deals on trailers, just suck at sending the warranty info!! Hey LS, I am looking for a 2001 or newer clk430 coupe for the wife. Any color but silver. Have anything??
|
Originally Posted by firstoffshore
(Post 2153647)
I run one of the largest Sea Ray boat dealerships in the country. I am located in Brick, NJ (MarineMax 732-840-2100).
|
2 Attachment(s)
Originally Posted by Playn
(Post 2153639)
Commercial construction, mostly restaurants www.wheatonconstruction.net
I've been dead for almost six months. I've done one restaurant (Whataburger) in that time. I have a Panda Express to start in couple weeks, the a Home Depot in Jax, and a park in Jax Monday after next. The park is using an epoxy flooring that we also install. We don't get a lot of call for it. I'm also branching out into tub, tile, and counter recoating. Here's pictures of my tub that I just did. Before and after pictures. |
3 Attachment(s)
Here's a McDonald's we did in Fort Pierce. For restaurants, we will travel as far south as Ft Pierce, north to Brunswick, Ga on I-95. On the I-4 corridor, we cover from Tampa to Daytona, including Orlando, where most of my work comes from.
We have worked as far south as Key West and Naples, and as far west as Tallahassee. Have Saw, Will Travel. :) |
Originally Posted by cuda
(Post 2153673)
Here's a McDonald's we did in Fort Pierce. For restaurants, we will travel as far south as Ft Pierce, north to Brunswick, Ga on I-95. On the I-4 corridor, we cover from Tampa to Daytona, including Orlando, where most of my work comes from.
We have worked as far south as Key West and Naples, and as far west as Tallahassee. Have Saw, Will Travel. :) Cuda, what did you re-finish in those MC D's pics. Thanks JEFF |
I think I have posted in this before, but cant remember... I do landclearing and demolition mostly, as well as grading, concrete removal, debris, etc... Getting into the rolloff buisness now, as I am getting a lot of calls for it.
|
Originally Posted by Jassman
(Post 2153685)
Cuda, what did you re-finish in those MC D's pics. Thanks JEFF
Btw, we had to do that mosaic inlay piece by piece, 2 inch pieces, and the mosiac tile was thinner than the field tile. It came out perfect. :) |
Fubard any deals on a 52 sedan bridge low hours either the qsms or mans?By the way i am a chevy/buick/toyota dealer and used car dealer.
|
All times are GMT -5. The time now is 07:02 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.