Will CMI or Stellings fit a 38' Fountain SC
#1
Registered
Thread Starter
Will CMI or Stellings fit a 38' Fountain SC
1992 Boat, has 2 502 motors in stock side by side location . Will any of these headers NOT fit ??? Is a 454 and 502 exhaust the same ? Thank you , Joe
#2
speel chekk this fokker!
Charter Member
Join Date: Feb 2001
Location: Locust Valley, New York
Posts: 5,329
Likes: 0
Received 0 Likes
on
0 Posts
old style stelling might not clear the accessories on eth front of the engine. I had to get a marine machine power steering pump bracket which mounts on eth the other sid eof teh engien from a merc bracket. And i had to cut down the alt/ps bracker to clea. Its now just an alternator bracket
the tailpipes are the big kicker. Hopefully you the boat has standard cutouts for the tips. CHeck out custommarine.com and they have the dimensions listed so you cans see if any of thier "off the shelf" stuff will fit.
the tailpipes are the big kicker. Hopefully you the boat has standard cutouts for the tips. CHeck out custommarine.com and they have the dimensions listed so you cans see if any of thier "off the shelf" stuff will fit.
__________________
Pardon me, while I whip this out!
Pardon me, while I whip this out!
#3
Official OSO boat whore
Charter Member
iTrader: (2)
Join Date: Oct 2000
Location: Mequon, WI
Posts: 6,157
Likes: 0
Received 0 Likes
on
0 Posts
The Stellings and CMI's come in several different profiles. The Stellings are a little more stock than the CMI's. Guess you really need to do some measuring.
Thread
Thread Starter
Forum
Replies
Last Post
Tibbstoy2
General Q & A
11
03-02-2006 12:23 PM