Offshoreonly.com - xr with i.t.s. drive showers

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - xr with i.t.s. drive showers (https://www.offshoreonly.com/forums/general-boating-discussion/67867-xr-i-t-s-drive-showers.html)

Havasu Cig

01-05-2004 01:11 PM

Quote:

Originally posted by Steamin' Rice
The top cap on the drive with the ITS is a little bit taller that the std bravo top cap.. There are some "cooling fins" in the cap, so the drive shower needs to fit over these. It's just a minor change from the std bravo XR

I switched out my standard caps with billet ones. All that was required was longer bolts to fit the caps and showers. I would think this would be true with most showers.:confused:

rbtnt

01-05-2004 11:21 PM

I would go with the Billet Marine caps, especially if you have twins. The stronger cap provides added strength for the left hand turning drive along with the cooling.

ash72201

01-07-2004 04:04 AM

thanks guys im going to check out some of these sites

All times are GMT -5. The time now is 12:43 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page