Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   HELP!!! Looking for a machine shop in Fort Lauderdale area (https://www.offshoreonly.com/forums/general-boating-discussion/67910-help-looking-machine-shop-fort-lauderdale-area.html)

rchevelle71 01-04-2004 09:06 PM

HELP!!! Looking for a machine shop in Fort Lauderdale area
 
OK,

Heres the deal, I need a set of small block heads rebuilt, pretty much stock with the exception of some stronger springs for a mildly larger cam. I am relatively new to the area, well, 18 months, but have not had to do anything like this yet, so I have never had to find one. Any help would be appreciated. Also, if anyone knows what this goes for around the area, I have always had buddies to it for me for almost nothin back Home. If the cost is going to be too much, I may just hunt down a Vortec Intake, and go that route. This is an older boat, that is going to be sold soon, so I dont want to invest a ton, but might as well do them while they are off.

Thanks,

Rick

open87 01-04-2004 09:09 PM

send them to competition in palm coast. i don't have a #
pm d-hlaw he has the #:)

rchevelle71 01-05-2004 08:16 AM

Thanks Open,

Anyone else, I would rather just take them somewhere local rather than shipping them. I can drop off anywhere from West Palm to Miami.

Thanks,

Rick

Goodfella 01-05-2004 08:28 AM

Contact Mike @ General Performance. He is one of the best cylinder head techs in South Florida.
1-954-785-7161. Tell him Mike Wood sent you.

Tim G. 01-05-2004 08:31 AM

Rick-
WTF are you doing now???

Scott B 01-05-2004 08:58 AM

For just general head work, go to Terrill motors off of Sunrise. We use them a bunch (primarily diesel work) and their work has been great. If you want hipo work, they may not be your best choice, I do not know.

Scott B

rchevelle71 01-05-2004 08:59 AM


Originally posted by Tim G.
Rick-
WTF are you doing now???

Surprise Surprise!!!!!

Wouldnt you like to know!!!!!

Nah, nuttin much, just want to make sure this frikken thing dont break again anytime soon, at least not before selling it!!!!

I have the exhaust off, as you know, I am just thinking of doing a little freshening up before screwing it back together.

BTW, I have an Anchor, and some accessories for ya on the front seat of the truck.

Rick

GOFSTCAT 01-05-2004 12:45 PM

try calling rick or jimmy at expert engine in hollywood there number is 954-920-7736 great work and great people


All times are GMT -5. The time now is 07:49 PM.


Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.