Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   RC Offshore Boat owners (https://www.offshoreonly.com/forums/general-boating-discussion/69143-rc-offshore-boat-owners.html)

GregP 01-16-2004 12:29 PM

RC Offshore Boat owners
 
How big is your boat and how fast can you run in real offshore conditions (3-4's at least). Anyone make some 10' or so hulls? Anything that can run 60-70 in those conditions?


-Greg

mbwi 01-29-2004 09:34 PM

Greg... Just wondering if you found out what you needed too about the jp outboard from Merc?

racesdad 01-29-2004 09:38 PM

finedesign.com i bought one . "victory boat #7"

GregP 01-30-2004 07:07 AM

mbwi - I got in touch with their head of R&D, however out application was too small a program for them to be interested.

Bigyellowcat - I'd like to see what you have built, if you have some info you can send it to my e-mail [email protected]. "Ideal" would be less than 10' long, run 50-60, and be electric powered (gasoline isn't allowed in my application).

Thanks - Greg

Gordo 01-30-2004 09:12 AM


Originally posted by Bigyellowcat
i can build you one that will run as fast as you want in big seas and paint it to match your boat.

Tyson,
Did you build your own step bottom 26' or 27' boat a few years ago?

FASTTIMES 01-30-2004 10:54 AM

BigYellowCat-
is the boat you posted a Grand Sport? if so, do you know of any forsale? just curious
TC

BigSilverCat 01-30-2004 11:04 AM

he can build you one, and i think there is one for sale.
tyson
417-439-5040

Concept Designs 06-15-2004 11:11 PM

Re: RC Offshore Boat owners
 
I am selling my new RC Grand Sport 55" deep vee. Highly detailed – large scale radio controlled offshore powerboat. The size of the boat is 55 inches long and 15 inches wide. Speeds up to 40 mph with stock motor and 75 mph with HP motor. Has stepped hull, notched transom and rub rail. I have added back rails, new gas tank, flex cable and steel flex cable tube. The flex cable tube is fiber glassed into the hull with a water tight cable seal. I have installed waterproof black vinyl (nice leather style) to entire inside of boat and automotive semi gloss white paint on out side with professional spray equipment. It’s all ready for you to install your hardware and head for the water. I started building the boat, but I do not have enough free time to finish, I am selling the boat for the price I purchased it for; Price: $ 288.00. The completed Grand Sport-DV–55 boat sells for $1595.00 on website “http://grandsportrc.safeshopper.com/”. I also do custom air brushing and can match any boat graphics if you need a nice paint job. If you are interested you can e-mail me at [email protected]. I have pictures.

HyperBaja 06-16-2004 08:37 AM

Re: RC Offshore Boat owners
 
Gas > Electric.

With what your trying to do, hope you have a good charger, you might get 5-6 min of runtime. Buy a weed whacker, and use the engine off of it. Will be better off. I used to be into electric, had 2 fun boats, one flat out race 22 Enforcer, 4 turn Quad wind, 3000mah with 8 cells, can we say chine walk. Only got 4 min out of it.

Now have a gas boat, Ill run it for 1/2 hour, bring it in, more gas, then back out she goes.

robyw1 06-16-2004 08:42 AM

Re: RC Offshore Boat owners
 
I used to have an old MRP 41" Fountain. It had twin electric astroflight cobalt motors and would run 46-MPH according to the speedo of my old bowrider. It caught fire and was burned beyone repair. At that point I thought RC boats were too expensive so I decided to save money by sticking to real boats.

Roby


All times are GMT -5. The time now is 08:50 PM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.