Has anyone converted a trailer to a gooseneck 5th wheel?
01-27-2004, 03:06 AM
#11
Registered
Join Date: Sep 2002
Location: Completely Nationwide
Posts: 1,235
Likes: 0
Received 3 Likes
on
3 Posts
I've taken a gooseneck and made a bumper hitch. I also made it to where you can change it from bumper to gooseneck. This was on a steel Myco trailer. I had some plates made at the welding/ fabrication shop, bolted, and welded them to the trailer and the removable necks. The necks themselves are bolted together.
The gooseneck pulls nice. I also saw this done on a big cat so the onwer could make the boat and trailer fit into his garage.
Andy
The gooseneck pulls nice. I also saw this done on a big cat so the onwer could make the boat and trailer fit into his garage.
Andy
01-27-2004, 03:06 AM
#12
Registered
Join Date: Sep 2002
Location: Completely Nationwide
Posts: 1,235
Likes: 0
Received 3 Likes
on
3 Posts
I've taken a gooseneck and made a bumper hitch. I also made it to where you can change it from bumper to gooseneck. This was on a steel Myco trailer. I had some plates made at the welding/ fabrication shop, bolted, and welded them to the trailer and the removable necks. The necks themselves are bolted together.
The gooseneck pulls nice. I also saw this done on a big cat so the onwer could make the boat and trailer fit into his garage.
Andy
The gooseneck pulls nice. I also saw this done on a big cat so the onwer could make the boat and trailer fit into his garage.
Andy
01-27-2004, 03:06 AM
#13
Registered
Join Date: Sep 2002
Location: Completely Nationwide
Posts: 1,235
Likes: 0
Received 3 Likes
on
3 Posts
I've taken a gooseneck and made a bumper hitch. I also made it to where you can change it from bumper to gooseneck. This was on a steel Myco trailer. I had some plates made at the welding/ fabrication shop, bolted, and welded them to the trailer and the removable necks. The necks themselves are bolted together.
The gooseneck pulls nice. I also saw this done on a big cat so the onwer could make the boat and trailer fit into his garage.
Andy
The gooseneck pulls nice. I also saw this done on a big cat so the onwer could make the boat and trailer fit into his garage.
Andy
01-27-2004, 03:06 AM
#14
Registered
Join Date: Sep 2002
Location: Completely Nationwide
Posts: 1,235
Likes: 0
Received 3 Likes
on
3 Posts
I've taken a gooseneck and made a bumper hitch. I also made it to where you can change it from bumper to gooseneck. This was on a steel Myco trailer. I had some plates made at the welding/ fabrication shop, bolted, and welded them to the trailer and the removable necks. The necks themselves are bolted together.
The gooseneck pulls nice. I also saw this done on a big cat so the onwer could make the boat and trailer fit into his garage.
Andy
The gooseneck pulls nice. I also saw this done on a big cat so the onwer could make the boat and trailer fit into his garage.
Andy
01-27-2004, 03:06 AM
#15
Registered
Join Date: Sep 2002
Location: Completely Nationwide
Posts: 1,235
Likes: 0
Received 3 Likes
on
3 Posts
I've taken a gooseneck and made a bumper hitch. I also made it to where you can change it from bumper to gooseneck. This was on a steel Myco trailer. I had some plates made at the welding/ fabrication shop, bolted, and welded them to the trailer and the removable necks. The necks themselves are bolted together.
The gooseneck pulls nice. I also saw this done on a big cat so the onwer could make the boat and trailer fit into his garage.
Andy
The gooseneck pulls nice. I also saw this done on a big cat so the onwer could make the boat and trailer fit into his garage.
Andy
Thread
Thread Starter
Forum
Replies
Last Post
maxcraft
Technical Issues
0
08-16-2008 03:15 PM
Lucky Strike Jr
General Boating Discussion
1
04-04-2008 03:30 AM
priceb
Trucks, Trailers and Transportation
1
02-02-2008 10:43 AM
HayJay
Trucks, Trailers and Transportation
10
07-17-2006 10:24 PM
