A Boat is Born
02-08-2004, 08:21 PM
#1
Charter Member #232
Charter MemberThread Starter
A Boat is Born
I have a friend that makes a center console fishing boat called the G20. Today I was there when he popped Hull #8 out of the mold. I have never seen this done before so it was cool to help. This particular mold is a split mold that bolts together . Then to pop out the boat you have to seperate it. This was lifting the boat out of the mold after it was split.
__________________
Put your best foot forward!
Put your best foot forward!
02-08-2004, 08:23 PM
#2
Charter Member #232
Charter MemberThread Starter
This is a picture from the bow. You can see in thos picture the split mold. About two seconds after this picture one of the straps on the lift broke and the boat alost crashed to the floor
__________________
Put your best foot forward!
Put your best foot forward!
02-08-2004, 08:27 PM
#4
Charter Member #232
Charter MemberThread Starter
There she is. By the end of the day the deck was to be on the thing. It is amazing how fast things go together at this point. The deck and consoles are all built so it is cut off the exess and bolt it all together.
__________________
Put your best foot forward!
Put your best foot forward!
Platinum Member
02-08-2004, 08:32 PM
#6
This is cool! I have absolutley no idea how a boat is made from the forms. I need to visit a factory sometime to view the process.
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
02-08-2004, 08:38 PM
#7
VIP Member
very cool Jon, do you have a pic of one of his finished products. i remember you telling me about these 
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
02-08-2004, 08:49 PM
#9
Charter Member #232
Charter MemberThread Starter
Originally posted by glassdave
very cool Jon, do you have a pic of one of his finished products. i remember you telling me about these
very cool Jon, do you have a pic of one of his finished products. i remember you telling me about these
Jon
__________________
Put your best foot forward!
Put your best foot forward!
