Enough About Miami!!!!!!
VIP Member
02-15-2004, 03:15 PM
#23
Registered
Join Date: Dec 2003
Location: Los Angeles California
Posts: 8,306
Likes: 0
Received 2 Likes
on
2 Posts
Here is a picture of the cam bearing... but it didn't suffer from lack of oil either... that is why the low friction material became liquid and flowed out the edge... too funny... 
(pardon my sarcasm)...
(pardon my sarcasm)...
02-15-2004, 03:57 PM
#26
Charter Member#93
Charter Member
Hey Raddiction i told you so
If it makes you feel better i an on my laptop looking out my open window with the a/c on at the boats cruising by the hotel sun shining high 70's pleny of scenery
and a corona in hand, it really sucks.................not!
If it makes you feel better i an on my laptop looking out my open window with the a/c on at the boats cruising by the hotel sun shining high 70's pleny of scenery
and a corona in hand, it really sucks.................not!
02-15-2004, 06:00 PM
#29
Registered
Originally posted by Troutly
You and Warpanties could have shared a cell!
You and Warpanties could have shared a cell!
02-15-2004, 06:19 PM
#30
Registered
Join Date: Nov 2000
Location: Grand Haven, MI USA
Posts: 3,124
Likes: 0
Received 0 Likes
on
0 Posts
Hey Reed, looks like you need to pick your "buddies" a little better If he can't tell that is an oil problem then he has no business building motors. Don't you just love it when someone who performed a job, and then a subsequent failer, tells you it is your fault. No one owns up to anything now-a-days. It is a sad state of affairs.
If he can't tell that is an oil problem then he has no business building motors. Don't you just love it when someone who performed a job, and then a subsequent failer, tells you it is your fault. No one owns up to anything now-a-days. It is a sad state of affairs.
