Konrad 540 HP drive. A better idea!!!
#32
Performance Boat Center
VIP Member
PM mongo. He has a friend with a big 42 Corsa with Konrads....
Mongo will fill you in..
Mongo will fill you in..
__________________
Tim Gallagher
Performance Boat Center-FL
[email protected]
954-809-8739
Wright Performance, MTI, Cigarette, Sunsation
Tim Gallagher
Performance Boat Center-FL
[email protected]
954-809-8739
Wright Performance, MTI, Cigarette, Sunsation
#33
Registered
Join Date: Jan 2001
Location: ST. Louis, MO, USA
Posts: 1,658
Likes: 0
Received 0 Likes
on
0 Posts
$8k makes it competitive with SSM IIIs and Vs in both price and power handling. And you dont need to glass the transom of a TRS boat.
Sounds like a good deal to me.
Gary
Sounds like a good deal to me.
Gary
#37
Registered
i myself will soon be in the market for drives...i will definitely look at this setup..thanks for all the info biggus.. i think i would be silly for someone not to jump into this market. there are so many of us trs guys that love our boats and do not want to get raped with putting in #3s... in my eyes there is a a large market for this, it will just take a few guys to have the balls to take a shot and these guys will be in business. just my 2 cents..Mr. Wonderful
#39
Registered
Join Date: Mar 2004
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Stecz20
Konrad has been making these drives for the past seven years, the company has been in business machining for 34 years.
With all the recent Navy contracts over the past four years the parts will be available for a long time.
Konrad has been making these drives for the past seven years, the company has been in business machining for 34 years.
With all the recent Navy contracts over the past four years the parts will be available for a long time.
#40
Registered
Join Date: Mar 2004
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
AudioFn
If one converts from a Bravo, the cutout is larger to fit the Huber planetary, reversing gear. A tailpiece (carrier bearing) is bolted on to the gear. The extension box is made to the exact length for proper input shaft engagement from the drive into the tailpiece. This is the same as the #3 and shorter than the TRS, eliminating the gimbal bearing. The box cutout is larger than the existing Bravo Hole.
In the case of the Corsa 42 that Tim G mentioned was converted from Bravo to Konrad, a Cummins diesel was the engine and the torsional aspects of the six cylinder prohibited the direct couple as in the gasoline style. When traditional stern drives are concerned, diesel has a different set of rules from the flywheel to the drive input than gas applications.
Furthermore, the TRS replacement is much easier. Essentially, everything inside the boat is the same, even the inner transom plate. The bolt pattern is the same so the TRS gimbal housing is pulled out and the Konrad 540 fits right in to the transom. The oil hose is the same, etc.
If one converts from a Bravo, the cutout is larger to fit the Huber planetary, reversing gear. A tailpiece (carrier bearing) is bolted on to the gear. The extension box is made to the exact length for proper input shaft engagement from the drive into the tailpiece. This is the same as the #3 and shorter than the TRS, eliminating the gimbal bearing. The box cutout is larger than the existing Bravo Hole.
In the case of the Corsa 42 that Tim G mentioned was converted from Bravo to Konrad, a Cummins diesel was the engine and the torsional aspects of the six cylinder prohibited the direct couple as in the gasoline style. When traditional stern drives are concerned, diesel has a different set of rules from the flywheel to the drive input than gas applications.
Furthermore, the TRS replacement is much easier. Essentially, everything inside the boat is the same, even the inner transom plate. The bolt pattern is the same so the TRS gimbal housing is pulled out and the Konrad 540 fits right in to the transom. The oil hose is the same, etc.