Need a Diamond Plate tool box.
#1
(aka) Pure Adrenaline
Platinum Member
Thread Starter
Need a Diamond Plate tool box.
I am looking for a diamond plate tool box for the front of my boat trailer. Really having a hard time finding the size I need so I might have to have it built.
12"front to back X 14"high X 48"long. Also want it to open from the top not front. Thanks Doug
12"front to back X 14"high X 48"long. Also want it to open from the top not front. Thanks Doug
Last edited by Doug; 02-29-2004 at 06:29 PM.
#3
Registered
Join Date: Aug 2003
Location: Boston, Ma
Posts: 1,481
Likes: 0
Received 0 Likes
on
0 Posts
I have a triangle box mounted right on the tounge of the trailer. Like this.
http://www.autostyles.com/silver.htm...R%20TOOL%20BOX
http://www.autostyles.com/silver.htm...R%20TOOL%20BOX
#4
(aka) Pure Adrenaline
Platinum Member
Thread Starter
Thanks guys. I have thought about the side truck box and might do that as last resort, I just kind of want it mounted to the outside. I don't have enough room for the triangle. The boat is pretty far up on the trailer and with the winch mount and V-block mount there is no room.
#5
Registered
TOOL BOX
Check out the boxes from WEATHER GUARD they are the best the the tool box buss. clear coated and have the best seals. I have been using them for years in my work trucks. Congrates on a sweet boat. Steve
#6
Platinum Member
Platinum Member
Here are a few more companies that might be worth a try.
Tool Boxes
Barrett Tool Boxes
Reading
Taylor
More Tool Boxes
Knaack
Tool Boxes
Barrett Tool Boxes
Reading
Taylor
More Tool Boxes
Knaack
Last edited by Hot Duck; 03-01-2004 at 01:58 PM.
Thread
Thread Starter
Forum
Replies
Last Post
bryanspeedracer
General Boating Discussion
18
08-12-2004 12:47 PM