Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Bullet Cabin Upgrades (https://www.offshoreonly.com/forums/general-boating-discussion/73424-bullet-cabin-upgrades.html)

OldSchool 04-24-2004 09:49 PM

1 Attachment(s)
Here are the "completed" Photos. Got the GPS antenna installed and the "Panel" Back from the painter to cover the hole left by removing the Loran. The boat is running great, We've put 8 hours on her in the last week. I'm going to need a part-time job to pay for gas!!:cool:

OldSchool 04-24-2004 09:53 PM

1 Attachment(s)
Helm Done. I used the smaller GPS antenna (GA26c) and it seems to work fine. The Gaffrig speedo is deadly accurate up to 60 and then it starts exaggerating. :D :D

R Addiction 04-24-2004 10:59 PM

Panel looks great Craig!! Where is the GPS antenna?;)

Von Bongo 04-25-2004 07:35 AM

1 Attachment(s)

Originally posted by R Addiction
Panel looks great Craig!! Where is the GPS antenna?;)
I think you are asking in Jest but in case you aren't

R Addiction 04-25-2004 08:24 AM

No jest.....just a whole lot of Capt. & Cokes!! Thanks!!!:p

R Addiction 04-25-2004 08:25 AM

Craig, Does the antenna come in white?:confused:

OldSchool 04-25-2004 09:23 AM


Originally posted by R Addiction
Craig, Does the antenna come in white?:confused:
No:( Garmin says it probably won't work if I paint it and I'm not up for a $100 experiment at this time!!:D :D

Thunder32 04-25-2004 09:38 AM

Craig-
can you take a closer pic of the antenna install for me?
looking for ideas on how and where to install it so it doesn't look obtrusive.

Adam

R Addiction 04-25-2004 01:18 PM

Thanks Craig. Looks Great!:cool: I'm planning on a gps install like yours. You have answered alot of my questions with your Bullet.

OldSchool 04-25-2004 06:51 PM


Originally posted by Thunder32
Craig-
can you take a closer pic of the antenna install for me?
looking for ideas on how and where to install it so it doesn't look obtrusive.

Adam

I don't have a closer pic now but I'll try to remember next weekend to take one. The upholstered piece above it was removed and I drilled a 3/4" hole behind it for the connector/wire to go through. I just used some 4200 to attach it to the fiberglass.


All times are GMT -5. The time now is 02:06 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.