I have heard the same thing from everyone about Mr. Spinelli. In speaking with the gentleman from whom I will likely purchase these wheels, he said they can still be worked if needed. He is a stand up gentleman.

To clarify, it is $400 per prop, not the set.

Had a pair made for my 32 Sunsation with 2-454s with Whipple SC's. The props never worked. Lots of blow out, hard to get on plane, never approached the speed of Bravo I 4 blade that were purchased after the Spinelli's. Spinelli made 3 attempts to rework. Cost me alot in shipping.

I had them on the Cafe Call me if you want my opinion. I'd go for it if they are in good shape

Thanks for all of your replies. The main thing is I need feedback on the Skater application. All props perform differently in various applications. Here's an example, lets say you have Boat X running a 14X23 Merc labbed prop. Now put on a 14X23 Spinelli or Hydromotive and the boat may performa drastically different.

Brandy spankin' new.

I just called a friend They did Close shop few years back :(

Shane I ran a set of their cleavers on a 33' cat I owned years ago. Those props had a decent amount of rake and I could feel the whole boat lift not just the nose. There was not enough blade area for that particular boat but I really liked the way the ran. Give them a try

.
 

They used to advertise if you aren't running there
props your running behind the props.


:D :D

Cougarman

Here Shane found my story with those props posted elswhere;
BTW they were used paid $550 for both and sold a set of 3 blades 23" for $300, thus net was $250.

Thanks GL.:)