help with V-10 super duty
03-12-2004, 08:13 AM
#1
Registered
Thread Starter
Join Date: Oct 2002
Location: cedar rapids Iowa
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
help with V-10 super duty
I got a 2000 f-250 with a V-10 and my "check engine light" came on. I took to a auto parts store to test codes and it said po171 too lean bank 1 and po174 too lean bank 2. any ideas what this could be? 
Charter Member
03-12-2004, 08:58 AM
#3
Platinum Member
Platinum Member
03-12-2004, 09:00 AM
#4
Platinum Member
Platinum Member
Actually, I went ahead and posted your question on their V-10 forum. Keep an eye on it here:
http://www.ford-trucks.com/forums/sh...hreadid=216513
http://www.ford-trucks.com/forums/sh...hreadid=216513
03-12-2004, 08:58 PM
#5
Registered
Thread Starter
Join Date: Oct 2002
Location: cedar rapids Iowa
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
thanks baja daze I found hole in the 90 degree hose going to intake. it had a good vacuum leak so i hope this take care of it. man I owe you a beer or two.
Thread
Thread Starter
Forum
Replies
Last Post
Buddy OO
Trucks, Trailers and Transportation
5
10-20-2007 08:41 PM
