Baja 250 Stainless rails
#1
Registered
Thread Starter
Join Date: Apr 2002
Location: Lake of the Ozarks
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
Baja 250 Stainless rails
I have a customer looking for the port grab handle that runs down the side of the engine hatch onto the side of the swim platform on a 1989 Baja sport 250 Really looking for a used one someone has off a wrecked boat or something if not a name of a company that could produce one I have only found one group of people to make the rail that would take on the job, if anyone can help let me know or email at [email protected]
#2
Registered
Join Date: Nov 2003
Location: 1 Flu Ovr KuKos Nest-WI
Posts: 9,950
Likes: 0
Received 0 Likes
on
0 Posts
Not available thru the dealer? Call Big Thunder in the Ozarks, maybe they can help. They sell alot of them. You could call Kendor Marine in Milwaukee. They stock a ton of misc parts and have lots of stainless for all kinds of stuff. 414-431-6601 Explain what size and curves and they may have it, OR a matching pair then you could switch your starboard(if applicable)
#5
Registered
Thread Starter
Join Date: Apr 2002
Location: Lake of the Ozarks
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
I beleive Lu is a god person although she probably doesn't know who I am, but other than that there is not a whole lot of Brilliant people there everyone that was good has left, at least from what i understand, I sometimes get a kick out of this board especially with the tech questions etc. everyone is a mechanic and knows exactly the right way to do everything....only most are wrong and to hear a suggestion to ask for something from Big Thunder was funny, He is a successful man don't get me wrong. I was actually looking for this rail for a friend and he already checked with them and even found out who originally made the rail but I beleive he is deceased or at least quit business, so I told him i would give the one last look to see if someon had a used one on here, I found a killer company that can make a new one but they will only make both rails together to be sure they match and are accurate, this is their business practice and I appreciate that and thought their price of $650 for a set of custom rails sounded pretty cheap but the boat owner was as always hoping for something alittle cheaper, In the end i think we will have to get these custom rails made. at least that is what i would do but it's not my money. I didn't mean anything bad by my big thunder comments and if your ever down around the ozarks get ahold of me.
#6
Guest
Posts: n/a
threw one away about four years ago.
getting parts from baja is an expensive and challenging issue.
i needed a windshield piece once, baja wanted over $1,100 for half a windshield. i had a whole new one fabricated for less than $700.
ordered a cabin door lock once from baja's authorized dealer, cost $100 and didn't even come close to working. can anybody say dick simon
getting parts from baja is an expensive and challenging issue.
i needed a windshield piece once, baja wanted over $1,100 for half a windshield. i had a whole new one fabricated for less than $700.
ordered a cabin door lock once from baja's authorized dealer, cost $100 and didn't even come close to working. can anybody say dick simon
#8
Registered
Join Date: Nov 2001
Location: Palm Harbor, FL
Posts: 3,959
Likes: 0
Received 0 Likes
on
0 Posts