Need Fly Wheel Changed in Miami / Ft. Lauderdale
#1
Platinum Member
Platinum Member
Thread Starter
Need Fly Wheel Changed in Miami / Ft. Lauderdale
I need to have a fly wheel changed ASAP. Any Help would be appreciated. Boat is in Ft. Laudeardale, but will Travel. Help!!!!
#3
Performance Boat Center
VIP Member
Troy at Supreme Marine can make it happen. 954-797-1818. Make sure you tell him Tim G sent you..
See you at the PR this weekend.
See you at the PR this weekend.
__________________
Tim Gallagher
Performance Boat Center-FL
[email protected]
954-809-8739
Wright Performance, MTI, Cigarette, Sunsation
Tim Gallagher
Performance Boat Center-FL
[email protected]
954-809-8739
Wright Performance, MTI, Cigarette, Sunsation
#4
Offshoreonly Advertiser
Offshoreonly Advertiser
Tres is good, but you can also try Steve Lopez, he was the crew chief for DeSantis last year. Just north of Ft Laud in Pompano (he rents half our building from us)
954-816-9598
954-816-9598
__________________
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
#6
Platinum Member
Platinum Member
Thread Starter
Thanks Scott,
J. T. Hooked me up, and is going to fix it in the morning. Be careful of the new little mercury starters, third set out of the box that puked the gear. See you Thursday. First round on me!
J. T. Hooked me up, and is going to fix it in the morning. Be careful of the new little mercury starters, third set out of the box that puked the gear. See you Thursday. First round on me!
#9
Warped & Twisted Member
Platinum Member
Originally posted by JimV
Animalhouse,
Check to make sure the starter doesn't need shims. I had a similar problem, after adding some shims the problem went away.
Animalhouse,
Check to make sure the starter doesn't need shims. I had a similar problem, after adding some shims the problem went away.