Go Back  Offshoreonly.com > General Discussion > General Boating Discussion
O/T Power Chips for 6.0 PSD >

O/T Power Chips for 6.0 PSD

Notices

O/T Power Chips for 6.0 PSD

Old 03-29-2004, 01:55 PM
  #1  
Registered
Thread Starter
 
restabr's Avatar
 
Join Date: Dec 2003
Location: Pascagoula, MS/Orange Beach, AL
Posts: 146
Likes: 0
Received 0 Likes on 0 Posts
Default O/T Power Chips for 6.0 PSD

I'm looking for a performance chip to put in a 6.0l Ford PSD. Which one's the best, what are the pro's and cons??

Thanks for any help
restabr is offline  
Old 03-29-2004, 02:35 PM
  #2  
Charter Member#1545
Charter Member
 
Join Date: Mar 2001
Location: Grand Junction, Co.
Posts: 879
Likes: 0
Received 0 Likes on 0 Posts
Default

The Edge with Attitude monitor works extremely well. The built in safeguards are very nice and you can set up the module to your liking. Jassman has the Edge, I am sure he will chime in here. Sam
Neverfastenuf is offline  
Old 03-29-2004, 03:28 PM
  #3  
Platinum Member
Platinum Member
 
Jassman's Avatar
 
Join Date: Oct 2000
Posts: 9,396
Received 30 Likes on 15 Posts
Default

Check out WWW.Edgeproducts.com . PMT is an OSO sponsor and sells them as well. It works awesome, especially with the Attitude which has a built in gauge package, all adjustable on the fly, 40, 60, 80, 100, and 115hp which is really 127hp and up to 290torque. The only problem is on level 4 and 5 should only be used on highway, it overpowers the tranny, especially from a stop sign. Im very pleased and also have them on both my Duramaxes, one has over 190,000 miles. Call me if you have Q's, otherwise get it and you will be pleased. I turned a 13.989 in a 4wd dually, w/turbo back dual exhaust and an AFR proguard 7 filter set up. Enjoy, Jeff 228-216-0900.
Jassman is offline  
Old 03-29-2004, 04:29 PM
  #4  
Registered
 
Join Date: Jun 2003
Posts: 48
Likes: 0
Received 0 Likes on 0 Posts
Default

Gail Banks just came out with one and it seems to be good. Some guys have problems with the edge when the trans shifts. go to www.fordtrucks.com under 6.0 and do a search. There are a few out now.
macvtt is offline  
Old 03-29-2004, 06:14 PM
  #5  
Registered
 
Semper Fi's Avatar
 
Join Date: Oct 2000
Location: SoCal
Posts: 4,276
Likes: 0
Received 7 Likes on 5 Posts
Default

PM "Boot" here on OSO. He is very knowledgeable.
Semper Fi is offline  
Old 03-29-2004, 08:05 PM
  #6  
Platinum Member
Platinum Member
 
Jassman's Avatar
 
Join Date: Oct 2000
Posts: 9,396
Received 30 Likes on 15 Posts
Default

No matter which module you get, after 80hp they all shift like crap. The trans when towing or loaded when in anything over 80 hp shifts great, so to me its a pressure line situation, some after market tuners for the tranny fix have been working on this for months. So if put in level 4 and 5, and you are into smokin tires all the time, all the way down the street, its best to leave in level 3, like I do, and use 4 and 5 on the highway, when some Mustang wants to run with you, you will get him every time, up to the speed limiter of 97. What you want is tech support, the best co out there is Edge period, you call the shop and talk to three people, AAron the owner, matt or Justin, all three of these guys will go out of their way to make it right if you have problems. 1-801-476-3343, toll free number. good luck, Jeff

www.edgeproducts.com
www.dieselstop.com
Jassman is offline  
Old 03-29-2004, 09:25 PM
  #7  
Registered
 
buck183's Avatar
 
Join Date: Dec 2001
Location: Siloam Springs, Ar.
Posts: 4,736
Received 14 Likes on 10 Posts
Default

All the above products are good products. Nothing bad to say about any of them.

The Diablo Predator Programmer does NOT have any shifting problems in the 100hp mode. Mine shift perfectly with no hesitation.

Buck
buck183 is offline  
Old 03-29-2004, 09:39 PM
  #8  
Registered
 
eyezlee's Avatar
 
Join Date: Feb 2001
Location: Broken Arrow/Grand Lake, OK
Posts: 1,797
Likes: 0
Received 0 Likes on 0 Posts
Default

would a Banks transcommand help out with the shifting? forgive me jumping in, I'm new to the diesel world, today actually.

http://www.bankspower.com/Transcommand.cfm

Last edited by eyezlee; 03-29-2004 at 09:48 PM.
eyezlee is offline  
Old 03-30-2004, 08:40 AM
  #9  
Registered
 
Join Date: Jul 2002
Location: Troy, Mich
Posts: 2,728
Likes: 0
Received 6 Likes on 5 Posts
Default I would look seriously at the Predator

Theuy have different settings.

For towing you want to keep EGT lower and lower firmness on the shifts.

Wannabe
wannabe is offline  
Old 03-30-2004, 01:30 PM
  #10  
Registered
 
Join Date: Dec 2000
Location: Flemington, N.J. U.S.A
Posts: 2,174
Received 5 Likes on 3 Posts
Default

I haven't tried the predator yet even though I sell them ... MOst programmers don't work well ,and loose their power over time . Maybe not on this one ,I don't know . Other then that , The ONLY one that works is the Edge box . The newer ones don't have shifting problems . You have to get the right one and there is a trick to instaling it too.

NO , the Banks trans comand doesn't work very good on anything ! Neither do their chips .... ( I sell them too ) . Joe
boot is offline  

Quick Reply: O/T Power Chips for 6.0 PSD


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.