boat Launch Backup lights tahoe/yukon
#1
VIP Member
Platinum Member
Thread Starter
boat Launch Backup lights tahoe/yukon
here is my first Tahoe Mod remove cover off Z71 roof rack, drill Hole for new light.. Make sure you have a light
that will fit this app.
that will fit this app.
Last edited by wwwTOPDJcom; 03-30-2004 at 08:46 PM.
#3
VIP Member
Platinum Member
Thread Starter
now there is some lights , I put them on a switch
but with a relay you could put them on your backup light
circuit, Dont wire direct to the backup light, Too much current
but with a relay you could put them on your backup light
circuit, Dont wire direct to the backup light, Too much current
Last edited by wwwTOPDJcom; 03-30-2004 at 10:47 PM.
#4
Platinum Member
Platinum Member
Looks cool, does it light up alot in a certain area like a headlight, or just lights up the area like a fog light, thanks Jeff
#5
VIP Member
Platinum Member
Thread Starter
put a couple 50 watt halogens and it lights up the whole ramp I would'nt go much higher because the housing is plastic and might melt with 100s
Last edited by wwwTOPDJcom; 03-30-2004 at 10:45 PM.
#7
Platinum Member
Platinum Member
Thanks, looks awesome, sometimes I leave before dawn and have to hook up to a trailer, this will come in handy, Jeff
#8
Registered
Lights
I do the same on my trucks, I was wondering why GM didnt do that as a factory option.
Looks great.
I wire mine though a relay on a switch and a seperate relay through the back up light trailer harness to turn on by reverse lights and by a seperate switch.
Looks great.
I wire mine though a relay on a switch and a seperate relay through the back up light trailer harness to turn on by reverse lights and by a seperate switch.
#9
VIP Member
Platinum Member
Thread Starter
Re: Lights
Originally posted by Hi-Tech Marine
I do the same on my trucks, I was wondering why GM didnt do that as a factory option.
Looks great.
I wire mine though a relay on a switch and a seperate relay through the back up light trailer harness to turn on by reverse lights and by a seperate switch.
I do the same on my trucks, I was wondering why GM didnt do that as a factory option.
Looks great.
I wire mine though a relay on a switch and a seperate relay through the back up light trailer harness to turn on by reverse lights and by a seperate switch.
wired relay through hot acessory juice so it cannot
be accidently left on and drain battery
If you have any question as to how to wire have a friend
that fully understands auto electric help you