CHAOS REIGNS

i've got another thread going on where to get a pulley

but that has me thinking


what size pulley's should be running my power steering pump and my raw water pump?

my motor runs cold now -- i'm wondering if my power steering and raw water are backwards -- and the smaller one should be running the raw water -- not the power steering ??


i've got a 79 454 gen IV ???


i know this is posted i nthe Tech forum -- but i wasn't get any response -- and i need to get one on order asap so i can boat this weekend!!!!!

CHAOS REIGNS

ttt

LapseofReason

A t-stat is what you need to control temp unless you are running a big motor, I havn't looked at my motors latley but I think my raw water pump and p/s are about the same size.

CHAOS REIGNS

how about the power steering pulley -- same as the alt and raw water -- or smaller ?

LapseofReason

Alt. is way smaller than raw water and p/s

CHAOS REIGNS

really? on the crank shaft pulley??


i know the alternator itself is a lot smaller -- i'm just referring to the 3 groove crank shaft pulley

LapseofReason

I have a serpentine belt so it's one belt, but all should be the same size on a v- belt too.