Offshoreonly.com
Page 4 of 4
« First
2
3
4
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Powder coated props (https://www.offshoreonly.com/forums/general-boating-discussion/77773-powder-coated-props.html)

powerguy 04-28-2004 12:40 PM
They kind of have the color of a french canadian front door.... sometimes the whole house.:D :D :D

GLH 04-28-2004 02:12 PM
Originally posted by powerguy
They kind of have the color of a french canadian front door.... sometimes the whole house.:D :D :D
Oui

BLee 04-28-2004 05:47 PM
Originally posted by GLH
Brandon that's what I'm turning What RPM do you turn? Us 5100
Are they Labbed? Us yes
What gear? Us 1.50

Your top end is significantly higher than mine you have to be turning 1.36's or else where is the diff?
I turn 5200 R's. I am running a 1.5 ratio. The difference is probably that our boats are totally different boats. :D :D

GLH 04-28-2004 05:51 PM
Originally posted by PokerRunGunT/S
I turn 5200 R's. I am running a 1.5 ratio. The difference is probably that our boats are totally different boats. :D :D
They are different boats but the slip factor has to be way out of wack on me I top out at 5100 max speed 81 in salt and you at 5200 go 93!!!!!

I'll look at BAM but one turn of the wheel is one turn of the wheel If you way less then your RPM should be higher.


All times are GMT -5. The time now is 04:10 PM.
Page 4 of 4
« First
2
3
4
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.