Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   One GOOD gas rumor! (https://www.offshoreonly.com/forums/general-boating-discussion/78854-one-good-gas-rumor.html)

IDRPSTF 05-13-2004 11:40 AM

I guess buy a 17 and have cup pulled out of it to allow for RPM.
I doubt it will hit 6600, but it should get higher than 5000.
What is the overall opinion here. That is a huge rpm gap for such a small prop.
I have a really stupid question. Are props in your area measured in inches?
American Props are numbered by inches. Meaning Pitch = number of inches a prop will travel through the water with one 360 degree revolution. I am wondering if they are stamping with another measurement scale?

LudvaBMW 05-13-2004 11:45 AM

Remission again me falled internet

LudvaBMW 05-13-2004 11:51 AM

IDRPSTF




Do you think propeller if are in ins
So are certainly

LudvaBMW 05-13-2004 11:53 AM

Ještě by mne zajímalo kolik otáček vydrží
Alpha one 2 generace


Yet would me interest how much speed holds
Alpha one 2 generation

SS930 05-13-2004 12:01 PM


Originally posted by LudvaBMW
SS930



Contortive engine moment BMW 5.6Csi is 560nm
I think that it isn't small gyroscopic moment

Ludva

But this is at a high rpm, unlike what we are use to seeing with American BB Chevy engines. BMW engines make their torque/hp later, our BBC power comes on much earlier. The peak number of that BMW engine are impressive, but they a peaky engines... not very much unlike a turbo charged 4 cylinder engine (which is not good for a heavy boat). So what I'm trying to say is we don't have much experience with these types of engines. I think the Lambo engines which at popular in Europe are more similar to your engine. Those guys may be able to better advise you in prop selection.:cool:

Iggy 05-13-2004 01:32 PM


Our become names Czech republic
Nor Czechoslovakia!
Thank you for the correction.
Sorry if I offended you.

This is interesting. Ludva is running a BMW in front of an Alpha Gen2.
Everyone is right. The peak torque rpm is in the wrong place for a marine engine. Not enough low speed power.

LudvaBMW 05-13-2004 01:48 PM

Iggy




I do think that motor has biggest gyroscopic moment
From 1300 to the 5000 speed in a minute

force 05-13-2004 01:51 PM

T HAS BEEN CALCULATED THAT IF EVERYONE IN THE UNITED STATES DID NOT
> > PURCHASE A DROP OF GASOLINE FOR ONE DAY AND ALL AT THE SAME TIME,
THE
OIL
> > COMPANIES WOULD CHOKE ON THEIR STOCKPILES.
> > AT THE SAME TIME IT WOULD HIT THE ENTIRE INDUSTRY WITH A NET LOSS
OF
OVER
> > 4.6 BILLION DOLLARS WHICH AFFECTS THE BOTTOM LINES OF THE OIL
COMPANIES.
> > THEREFORE MAY 19TH HAS BEEN FORMALLY DECLARED "Don't buy gas" DAY
AND
THE
> > PEOPLE OF THIS NATION SHOULD NOT BUY A SINGLE DROP OF GASOLINE
THAT
DAY.
> > THE ONLY WAY THIS CAN BE DONE IS IF YOU FORWARD THIS E-MAIL TO AS
MANY
> > PEOPLE AS YOU CAN AND AS QUICKLY AS YOU CAN TO GET THE WORD OUT.
> > WAITING ON THIS ADMIINSTRATION TO STEP IN AND CONTROL THE PRICES IS
NOT

> > GOING TO HAPPEN. WHAT HAPPENED TO THE REDUCTION AND CONTROL IN
PRICES
THAT
> > THE ARAB NATIONS PROMISED TWO WEEKS AGO?
> > REMEMBER ONE THING, NOT ONLY IS THE PRICE OF GASOLINE GOING UP BUT
AT
THE
> > SAME TIME AIRLINES ARE FORCED TO RAISE THEIR PRICES, TRUCKING
COMPANIES

> > ARE FORCED TO RAISE THEIR PRICES WHICH EFFECTS PRICES ON
EVERYTHING
THAT
> > IS SHIPPED. THINGS LIKE FOOD, CLOTHING, BUILDING MATERIALS,
MEDICAL
> > SUPPLIES ETC. WHO PAYS IN THE END? WE DO!
> > WE CAN MAKE A DIFFERENCE. IF THEY DON'T GET THE MESSAGE AFTER ONE
DAY,
WE
> > WILL DO IT AGAIN AND AGAIN.
> > SO DO YOUR PART AND SPREAD THE WORD. FORWARD THIS EMAIL TO EVERYONE
YOU

> > KNOW. MARK YOUR CALENDARS AND MAKE MAY 19TH A DAY THAT THE CITIZENS
OF
THE
> > UNITED STATES SAY "ENOUGH IS ENOUGH"

LudvaBMW 05-13-2004 01:51 PM

Iggy


At acceleration from seats (from 0)
Engine revs get on 3500
at once

LudvaBMW 05-13-2004 02:06 PM

Iggy


When the she'll get ship to the slippage so trim from drive on mountain among 1/4 and 1/2 engine revs go quickly up and rate also until speed 4850 there stops
Rpm increase remind of sliding clutch


All times are GMT -5. The time now is 02:02 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.