Offshoreonly.com - P&D Boat Project

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - P&D Boat Project (https://www.offshoreonly.com/forums/general-boating-discussion/79253-p-d-boat-project.html)

P&D Boat Project

I just picked up my new project boat this weekend. I'll post updates as I perform the work on this thread. This is a 1982 24 P&D.

Re: P&D Boat Project

Checking X-Dim, looks like around 14 - 14 1/2".

Going to have to plug and raise for more efficiency.

Re: P&D Boat Project

almost matches the house :)

Re: P&D Boat Project

Looks cool kent, Good luck with it and keep us posted of your progress.

Re: P&D Boat Project

Kent, that's gorgeous! What are you thinking on power/drive/ etc?

Re: P&D Boat Project

Quote:

Originally Posted by bglz42

Kent, that's gorgeous! What are you thinking on power/drive/ etc?

Power: Not sure yet. Possibly just a stout 502.

Drive: Bravo 1. HP transom assy.

Re: P&D Boat Project

Quote:

Originally Posted by Kent Perroux

Checking X-Dim, looks like around 14 - 14 1/2".

Going to have to plug and raise for more efficiency.

That is really low, you need atleast to be at 16 1/2 to 17

Re: P&D Boat Project

Is that fresh paint?

Re: P&D Boat Project

Gelcoat, no paint yet.

Wow just found this article. Did you ever finish the project. Have any pics and information on the hull.

Old projects never die....

https://cimg0.ibsrv.net/gimg/www.off...f8badc1f2b.jpg
https://cimg1.ibsrv.net/gimg/www.off...853e5ede11.jpg
https://cimg2.ibsrv.net/gimg/www.off...c8fc0232cb.jpg
https://cimg3.ibsrv.net/gimg/www.off...b6a437071f.jpg

Im Matt, Kent's oldest son, now 45, these pictures were 15 years ago when we got the boat, had to cut out all the covered stringers because they were hiding h2o treasure.. yes, it stunk... opened it all up and started to move the "X" Dimensions up because why not?

https://cimg3.ibsrv.net/gimg/www.off...1523d45aa1.jpg
Transom filled in, and re-painted
https://cimg4.ibsrv.net/gimg/www.off...e21b64ebce.jpg
this is me.. matt, waiting for the jig to drill some holes back in the boat.
https://cimg6.ibsrv.net/gimg/www.off...ddfcebb8f6.jpg
Gary, our Race buddy showed us the way.. Thanks Gary!
https://cimg7.ibsrv.net/gimg/www.off...ecc4f5abb9.jpg
Raise it some more! Imco to the rescue!
https://cimg0.ibsrv.net/gimg/www.off...4626c0b81f.jpg
I Made some Stainless brackets for the steering to hook to, 36" K Planes... mean rear end on just a 24' baot
https://cimg9.ibsrv.net/gimg/www.off...e8b681fdfa.jpg
I am going to catch up this thread with what we did with the P&D, Seems so long ago, but I still have the pictures so I may as well Share. This is a dying past time I feel and we need to keep this going.
Cleaned up the bilge, ran hydraulic lines for steering and trim. mounted and finished transom work with drive, tabs and steering. looks mean a hell.

A dash of This and a Dash of that....

https://cimg8.ibsrv.net/gimg/www.off...7869c6a12f.jpg
I spent a bunch of time finish sanding the dash work...
https://cimg9.ibsrv.net/gimg/www.off...f335449055.jpg
got it all painted up in a really pretty blue
https://cimg0.ibsrv.net/gimg/www.off...ff8398955c.jpg
ready for gauges
https://cimg7.ibsrv.net/gimg/www.off...8158e1e211.jpg
and I get back to the house and dad "Kent" goes ape S*^& on the dash with a Saws All... I was pretty pissed.. but....

take a seat sir...

https://cimg1.ibsrv.net/gimg/www.off...04962998bd.jpg
https://cimg8.ibsrv.net/gimg/www.off...9a34f2ee27.jpg
a bit of CNC router work with aluminum and a frame is born.
https://cimg2.ibsrv.net/gimg/www.off...c49dd9a72e.jpg
hand cut.. I'm not even sure if both seats are the same shape.. but they fit me and dad so who cares right?
https://cimg0.ibsrv.net/gimg/www.off...9509830e38.jpg
dash and seats installed

Wetter is better

Updated as of 2026...

The PnD Was with Kent, My dad for years, the water testing was done back in about 2007-2008. That is the year when I Joined the Air Force, I then moved up to Spokane to serve at Fairchild AFB for about 10 years. I drove down and brought the boat up to Washington so I can resurrect it. I found out dad found the limits of hull integrity when he launched it in some rough water and cracked the hull in 3 places, taking on water as he drove back to the dock.. it sat on the trailer for the time being. the dash rotted out, the engine sat in the garage and the whole project went to waste.. Now, the boat is with me, I now run a Snap-on Franchise and have not had a good place to work on it nor the time, but faced with the reality of time ticking away, I need to get this beast back in the water. I Found this old thread and I wanted to revive it, share our story, and and enjoy some more "Smiles Per Gallon" once again!

Stay tuned as I continue this project, none of us are getting any younger!

This is awesome! Keep it coming!

Awesome revival /continuation of this project. Thanks for posting, and thanks for your service!

Agreed! Thank you for your service and keep the pics coming!!!

Everything hurts... and I itch....

Im using all slow cure west systems epoxy, milled fibers for filler, 8lb structure foam, and some blood, haha

Thank you for reviving this thread.

https://cimg3.ibsrv.net/gimg/www.off...385f269f5.jpeg
https://cimg8.ibsrv.net/gimg/www.off...0bf659701.jpeg
Test fitting the control box, the seat fits nice and its comfortable, it shall do.
https://cimg2.ibsrv.net/gimg/www.off...152e5ea48.jpeg
Picked up an access hatch, cut to fit, I’ll mount it when paint is on.
https://cimg0.ibsrv.net/gimg/www.off...bc58c9676.jpeg
I used Dad’s existing Coosa as the support, back filled with 8lb foam then structural glass/epoxy, I decided to go with the open storage under the seat on the sides with the center closed off, center is the access to the fuel pickup/ sending unit.
https://cimg1.ibsrv.net/gimg/www.off...c32913b84.jpeg
https://cimg4.ibsrv.net/gimg/www.off...e6f01da51.jpeg
Filling/sealing the gauge cluster

Difficult to work on this, and run a buisness at the same time… also, why didn’t anyone tell me this boat stuff is expensive???