MSD Box brackets
3 Attachment(s)
On my Hustlers 500 efi motors I made these brackets my self for the marine MSD box .You can to. I made them out of aluminum and put the riv nuts in it . It bolts to the bracket behind the motor where the ecm is ,fuel pump relays are .
The harness was a good bit long .I just wire tied it under the L part of the bracket out of site.The worse part was hooking up the hot wire :( The boxes did clean up the Idle .Transom is clean now . Maybe I can richen the motors back up. |
Re: MSD Box brackets
2 Attachment(s)
Save that money and do it your self :D :D
|
All times are GMT -5. The time now is 11:30 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.