28 Skater Repower--- 2.5 race to 300x's
#71
Registered
Re: 28 Skater Repower--- 2.5 race to 300x's
curious how he's making out with lower units...they've been my only complaint. the port (counter rotator) housing cracks dead center above prop shaft and shoots up and around the left side. happened to previous owner, he welded the case, i re-cracked, then blew lower shortly there after. bought a brand new lower from merc 7 weeks later same thing. supposed to be a weak link in the counter's cause of how the gear sets are ?
#72
Allergic to Nonsense
Platinum Member
Thread Starter
Join Date: Aug 2001
Location: Granite Quarry, NC
Posts: 5,011
Likes: 0
Received 17 Likes
on
17 Posts
Re: 28 Skater Repower--- 2.5 race to 300x's
Originally Posted by berns29scarab
curious how he's making out with lower units...they've been my only complaint. the port (counter rotator) housing cracks dead center above prop shaft and shoots up and around the left side. happened to previous owner, he welded the case, i re-cracked, then blew lower shortly there after. bought a brand new lower from merc 7 weeks later same thing. supposed to be a weak link in the counter's cause of how the gear sets are ?
One thing I can speak directly to is you must retighten all key bolts/studs etc after every use...most don't need it...but if only one comes loose...look out.
THe second item..and even more imporatant is check your lower unit lube after each use........look for shavings or water.
If you find any water evidence replace your shift shaft seal immediately...... if you find a lot of water...tear down the unit and inspect everything.
T2x
#74
Registered
Re: 28 Skater Repower--- 2.5 race to 300x's
i re-torque my lowers after every use, and the oil gets changed every 8-10 hours. i was told by a merc tech that its usually the lefts because all the torque is loaded up on a different section of the lower.
#75
Registered
Join Date: Dec 2002
Location: chesapeake bay md
Posts: 959
Likes: 0
Received 0 Likes
on
0 Posts
Re: 28 Skater Repower--- 2.5 race to 300x's
Bern on my 300 promaxs the only lower problem I have had is with the right hand unit. I cracked one case on the bullit Just in front of the fwd gear and I have cracked 4-5 propshaft bearing carriers on the replacement case. No issues with the lh unit.
#76
Re: 28 Skater Repower--- 2.5 race to 300x's
I change my gear case oil every 3 times I go out or about every 5 - 10 hrs. Might be overkill and definitely not a cat so I don't come out of the water as much but I feel better safe than sorry.....
#77
Registered
Join Date: Mar 2001
Location: Rosedale,MD
Posts: 891
Likes: 0
Received 0 Likes
on
0 Posts
Re: 28 Skater Repower--- 2.5 race to 300x's
Originally Posted by mmwalters
Bern on my 300 promaxs the only lower problem I have had is with the right hand unit. I cracked one case on the bullit Just in front of the fwd gear and I have cracked 4-5 propshaft bearing carriers on the replacement case. No issues with the lh unit.
My Yamaha runs GREAT,
#79
Registered
Re: 28 Skater Repower--- 2.5 race to 300x's
Is anyone else seeing differences in water psi. My counter rotating lower is currently running 15-17 psi (right now the motors are very low), my standard rotating lower is only running 12-13 psi. Anyone know what might cause this?