Need 540 Engine Builder
06-04-2004, 09:12 AM
#1
Registered
Thread Starter
Need 540 Engine Builder
I am about ready to pull the triger and have an engine built and I need a builder.
I want to build a std deck 540 with all the good stuff, no junk foreign parts. I am looking for an engine which will have the following,
-Merlin or Dart block, forged internals, alumn heads, APR bolts, etc Capable of 900+HP
-8.5 to max 9.0 compression
-port matched single plane manifold
-heads- AFR 315ccCNC or JimV ported ones, cometic gasket or O-ringed
-about 650-700HP N/A, max rpm of 5600
-cam- hydraulic roller, ?crane 731 or 741
-rockers- comp or jessel
-nickerson carb, not dominator
-Eichert valve covers 2 piece
-After I get it in the boat and broken in I will then supercharge it with some of my centrifugal parts or get the RTech setup and run 8-9 pounds boost and see 900-1000 Hp and TQ.
Any interested engine builder Please PM me with your thoughts and price range. Thanks Marty.
I want to build a std deck 540 with all the good stuff, no junk foreign parts. I am looking for an engine which will have the following,
-Merlin or Dart block, forged internals, alumn heads, APR bolts, etc Capable of 900+HP
-8.5 to max 9.0 compression
-port matched single plane manifold
-heads- AFR 315ccCNC or JimV ported ones, cometic gasket or O-ringed
-about 650-700HP N/A, max rpm of 5600
-cam- hydraulic roller, ?crane 731 or 741
-rockers- comp or jessel
-nickerson carb, not dominator
-Eichert valve covers 2 piece
-After I get it in the boat and broken in I will then supercharge it with some of my centrifugal parts or get the RTech setup and run 8-9 pounds boost and see 900-1000 Hp and TQ.
Any interested engine builder Please PM me with your thoughts and price range. Thanks Marty.
Charter Member
06-04-2004, 10:15 AM
#4
Registered
Join Date: Dec 2003
Location: Los Angeles California
Posts: 8,306
Likes: 0
Received 2 Likes
on
2 Posts
Re: Need 540 Engine Builder
Originally Posted by WildThing
For the money this looks like a good company & I have heard good things about them
http://www.1800runsnew.com/gm10.htm
http://www.1800runsnew.com/gm10.htm
and a "non descript" forged crank... probably also from China.....
06-04-2004, 03:52 PM
#8
Registered
Join Date: Nov 2000
Location: Overland Park, KS
Posts: 295
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need 540 Engine Builder
Gene at Lightning Performance (Lake of the Ozarks) does a great job. Several OSOers have had Gene build their motors recently (me included). He is a perfectionist when it comes to putting them together and will not use anything but quality parts. He also has 4 blower motors (2 pairs) for sale if anyone is interested.
His number is (573) 374-7974.
Mine are 540 Dart Big M tall decks, SRP pistons, carrillo rods, GM perf heads, 9.75 to 1 CR, Dart single intake, Dominator 1050 carb (rebuilt and flowed by Nickerson), MSD 7 ignition with pro billet distributor. They run as smooth as my old 454s. Estimated 680 to 700 HP. Runs on 91 octane. He named them Thump and Bump.
Here is a picture of my recently built motors.
His number is (573) 374-7974.
Mine are 540 Dart Big M tall decks, SRP pistons, carrillo rods, GM perf heads, 9.75 to 1 CR, Dart single intake, Dominator 1050 carb (rebuilt and flowed by Nickerson), MSD 7 ignition with pro billet distributor. They run as smooth as my old 454s. Estimated 680 to 700 HP. Runs on 91 octane. He named them Thump and Bump.
Here is a picture of my recently built motors.
Last edited by waterbum; 06-04-2004 at 04:04 PM.
06-04-2004, 04:14 PM
#9
Moderator
Gold Member
Re: Need 540 Engine Builder
Originally Posted by tomtbone1993
I need some good complete 540 short blocks
I would also suggest them for your engine build Cobra Marty....
They are a member here, but not that active... PM them at INNOVATION...
06-04-2004, 06:44 PM
#10
Platinum Member
Platinum Member
Re: Need 540 Engine Builder
http://www.tmpsl.com/custom_engines.htm , CHECK IT OUT. Completely blueprinted, ported and polished. EFI or carbed, (go efi) 
The best parts, no short cuts and best of all NO B.S. Ask for Steven or Eddie 1-985-649-9888, or try my cell 228-216-0900, thanks Jeff Jassby
The best parts, no short cuts and best of all NO B.S. Ask for Steven or Eddie 1-985-649-9888, or try my cell 228-216-0900, thanks Jeff Jassby
